Download or read book 2013 IEEE Bipolar BiCMOS Circuits and Technology Meeting BCTM written by IEEE Staff and published by . This book was released on 2013-09-30 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2013 IEEE Bipolar BiCMOS Circuits and Technology Meeting BCTM written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Digital RF Memories and Transceiver Technologies for Electromagnetic Warfare written by Phillip E. Pace and published by Artech House. This book was released on 2022-05-31 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive resource and thorough treatment in the latest development of Digital RF Memory (DRFM) technology and their key role in maintaining dominance over the electromagnetic spectrum. Part I discusses the use of advanced technology to design transceivers for spectrum sensing using unmanned systems to dominate the electromagnetic spectrum. Part II uses artificial intelligence and machine learning to enable modern spectrum sensing and detection signal processing for electronic support and electronic attack. Another key contribution is examination of counter-DRFM techniques. DRFM and transceiver design details and examples are provided along with the MATLAB software allowing the reader to construct their own embedded DRFM transceivers for unmanned systems. It examines the design trade-offs in developing multiple, structured, false target synthesis DRFM architectures and aids in developing counter-DRFM techniques and distinguish false target from real ones. Written by an expert in the field, and including MATLAB™ design software, this is the only comprehensive book written on the subject of DRFM.
Download or read book Performance prediction of a future SiGe HBT technology using a heterogeneous set of simulation tools and approaches written by Tommy Rosenbaum and published by BoD – Books on Demand. This book was released on 2017-03-10 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bipolar complementary metal-oxide-semiconductor (BiCMOS) processes can be considered as the most general solution for RF products, as they combine the mature manufacturing tools of CMOS with the speed and drive capabilities of silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs). HBTs in turn are major contenders for partially filling the terahertz gap, which describes the range in which the frequencies generated by transistors and lasers do not overlap (approximately 0.3 THz to 30 THz). To evaluate the capabilities of such future devices, a reliable prediction methodology is desirable. Using a heterogeneous set of simulation tools and approaches allows to achieve this goal successively and is beneficial for troubleshooting. Various scientific fields are combined, such as technology computer-aided design (TCAD), compact modeling and parameter extraction. To create a foundation for the simulation environment and to ensure reproducibility, the used material models of the hydrodynamic and drift-diffusion approaches are introduced in the beginning of this thesis. The physical models are mainly based on literature data of Monte Carlo (MC) or deterministic simulations of the Boltzmann transport equation (BTE). However, the TCAD deck must be calibrated on measurement data too for a reliable performance prediction of HBTs. The corresponding calibration approach is based on measurements of an advanced SiGe HBT technology for which a technology-specific parameter set of the HICUM/L2 compact model is extracted for the high-speed, medium-voltage and high-voltage transistor versions. With the help of the results, one-dimensional transistor characteristics are generated that serve as reference for the doping profile and model calibration. By performing elaborate comparisons between measurement-based reference data and simulations, the thesis advances the state-of-the-art of TCAD-based predictions and proofs the feasibility of the approach. Finally, the performance of a future technology in 28 nm is predicted by applying the heterogeneous methodology. On the basis of the TCAD results, bottlenecks of the technology are identified.
Download or read book Scaling And Integration Of High speed Electronics And Optomechanical Systems written by Magnus Willander and published by World Scientific. This book was released on 2017-04-17 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coined as the third revolution in electronics is under way; Manufacturing is going digital, driven by computing revolution, powered by MOS technology, in particular, by the CMOS technology and its development.In this book, the scaling challenges for CMOS: SiGe BiCMOS, THz and niche technology are covered; the first article looks at scaling challenges for CMOS from an industrial point of view (review of the latest innovations); the second article focuses on SiGe BiCMOS technologies (deals with high-speed up to the THz-region), and the third article reports on circuits associated with source/drain integration in 14 nm and beyond FinFET technology nodes. Followed by the last two articles on niche applications for emerging technologies: one deals with carbon nanotube network and plasmonics for the THz region carbon, while the other reviews the recent developments in integrated on-chip nano-optomechanical systems.
Download or read book Silicon Germanium Heterojunction Bipolar Transistors for Mm wave Systems Technology Modeling and Circuit Applications written by Niccolò Rinaldi and published by CRC Press. This book was released on 2022-09-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The semiconductor industry is a fundamental building block of the new economy, there is no area of modern life untouched by the progress of nanoelectronics. The electronic chip is becomingan ever-increasing portion of system solutions, starting initially from less than 5% in the 1970 microcomputer era, to more than 60% of the final cost of a mobile telephone, 50% of the price of a personal computer (representing nearly 100% of the functionalities) and 30% of the price of a monitor in the early 2000’s.Interest in utilizing the (sub-)mm-wave frequency spectrum for commercial and research applications has also been steadily increasing. Such applications, which constitute a diverse but sizeable future market, span a large variety of areas such as health, material science, mass transit, industrial automation, communications, and space exploration.Silicon-Germanium Heterojunction Bipolar Transistors for mm-Wave Systems Technology, Modeling and Circuit Applications provides an overview of results of the DOTSEVEN EU research project, and as such focusses on key material developments for mm-Wave Device Technology. It starts with the motivation at the beginning of the project and a summary of its major achievements. The subsequent chapters provide a detailed description of the obtained research results in the various areas of process development, device simulation, compact device modeling, experimental characterization, reliability, (sub-)mm-wave circuit design and systems.
Download or read book SiGe based Re engineering of Electronic Warfare Subsystems written by Wynand Lambrechts and published by Springer. This book was released on 2016-10-19 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers a thorough understanding of the applicability of new-generation silicon-germanium (SiGe) electronic subsystems for electronic warfare and defensive countermeasures in military contexts. It explains in detail the theoretical and technical background, and addresses all aspects of the integration of SiGe as an enabling technology for maritime, land, and airborne / spaceborne electronic warfare, including research, design, development, and implementation. The coverage is supported by mathematical derivations, informative illustrations, practical examples, and case studies. While SiGe technology provides speed, performance, and price advantages in many markets, to date only limited information has been available on its use in electronic warfare systems, especially in developing nations. Addressing that need, this book offers essential engineering guidelines that especially focus on the speed and reliability of current-generation SiGe circuits and highlight emerging innovations that help to ensure the sustainable long-term integration of SiGe into electronic warfare systems.
Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.
Download or read book mm Wave Silicon Power Amplifiers and Transmitters written by Hossein Hashemi and published by Cambridge University Press. This book was released on 2016-04-04 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build high-performance, energy-efficient circuits with this cutting-edge guide to designing, modeling, analysing, implementing and testing new mm-wave systems.
Download or read book Nanoelectronics written by and published by Elsevier. This book was released on 2018-10-05 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronics: Devices, Circuits and Systems explores current and emerging trends in the field of nanoelectronics, from both a devices-to-circuits and circuits-to-systems perspective. It covers a wide spectrum and detailed discussion on the field of nanoelectronic devices, circuits and systems. This book presents an in-depth analysis and description of electron transport phenomenon at nanoscale dimensions. Both qualitative and analytical approaches are taken to explore the devices, circuit functionalities and their system applications at deep submicron and nanoscale levels. Recent devices, including FinFET, Tunnel FET, and emerging materials, including graphene, and its applications are discussed. In addition, a chapter on advanced VLSI interconnects gives clear insight to the importance of these nano-transmission lines in determining the overall IC performance. The importance of integration of optics with electronics is elucidated in the optoelectronics and photonic integrated circuit sections of this book. This book provides valuable resource materials for scientists and electrical engineers who want to learn more about nanoscale electronic materials and how they are used. - Shows how electronic transport works at the nanoscale level - Demonstrates how nanotechnology can help engineers create more effective circuits and systems - Assesses the most commonly used nanoelectronic devices, explaining which is best for different situations
Download or read book Hot Carrier Degradation in Semiconductor Devices written by Tibor Grasser and published by Springer. This book was released on 2014-10-29 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a variety of tools to address the challenges posed by hot carrier degradation, one of today’s most complicated reliability issues in semiconductor devices. Coverage includes an explanation of carrier transport within devices and book-keeping of how they acquire energy (“become hot”), interaction of an ensemble of colder and hotter carriers with defect precursors, which eventually leads to the creation of a defect, and a description of how these defects interact with the device, degrading its performance.
Download or read book Interleaving Concepts for Digital to Analog Converters written by Christian Schmidt and published by Springer. This book was released on 2019-07-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern complementary metal oxide semiconductor (CMOS) digital-to-analog converters (DACs) are limited in their bandwidth due to technological constraints. These limitations can be overcome by parallel DAC architectures, which are called interleaving concepts. Christian Schmidt analyzes the limitations and the potential of two innovative DAC interleaving concepts to provide the basis for a practical implementation: the analog multiplexing DAC (AMUX-DAC) and the frequency interleaving DAC (FI-DAC). He presents analytical and discrete-time models as a theoretical foundation and develops digital signal processing (DSP) algorithms to compensate the analog impairments. Further, he quantifies the impact of various limiting parameters with numerical simulations and verifies both concepts in laboratory experiments. About the Author: Christian Schmidt works at the Fraunhofer Heinrich-Hertz-Institute, Berlin, Germany, on innovative solutions for broadband signal generation in the field of optical communications. The studies for his dissertation were carried out at the Technische Universität Berlin and at the Fraunhofer Heinrich-Hertz-Institute, both Berlin, Germany.
Download or read book SiGe Ge and Related Compounds 6 Materials Processing and Devices written by D. Harame and published by The Electrochemical Society. This book was released on with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State of the Art of Millimeter Wave Silicon Technology written by Jaco du Preez and published by Springer Nature. This book was released on 2022-09-20 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the critical differences between current and next-generation Si technologies (CMOS, BiCMOS and SiC) and technology platforms (e.g. system-on-chip) in mm-wave wireless applications. We provide a basic overview of the two technologies from a technical standpoint, followed by a review of the state-of-the-art of several key building blocks in wireless systems. The influences of system requirements on the choice of semiconductor technology are vital to understanding the merits of CMOS and BiCMOS devices – e.g., output power, battery life, adjacent channel interference, cost restrictions, and so forth. These requirements, in turn, affect component-level design and performance metrics of oscillators, mixers, power and low-noise amplifiers, as well as phase-locked loops and data converters. Finally, the book offers a peek into the next generation of wireless technologies such as THz -band systems and future 6G applications.
Download or read book Concepts for Short Range Millimeter wave Miniaturized Radar Systems with Built in Self Test written by Girma, Mekdes and published by KIT Scientific Publishing. This book was released on 2019-11-21 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Arithmetic Circuits in Quantum Dot Cellular Automata Nanotechnology written by K. Sridharan and published by Springer. This book was released on 2015-03-26 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph focuses on the design of arithmetic circuits in Quantum Dot Cellular Automata (QCA). Using the fact that the 3-input majority gate is a primitive in QCA, the book sets out to discover hitherto unknown properties of majority logic in the context of arithmetic circuit designs. The pursuit for efficient adders in QCA takes two forms. One involves application of the new results in majority logic to existing adders. The second involves development of a custom adder for QCA technology. A QCA adder named as hybrid adder is proposed and it is shown that it outperforms existing multi-bit adders with respect to area and delay. The work is extended to the design of a low-complexity multiplier for signed numbers in QCA. Furthermore the book explores two aspects unique to QCA technology, namely thermal robustness and the role of interconnects. In addition, the book introduces the reader to QCA layout design and simulation using QCADesigner. Features & Benefits: This research-based book: ·Introduces the reader to Quantum Dot Cellular Automata, an emerging nanotechnology. ·Explores properties of majority logic. ·Demonstrates application of the properties to design efficient arithmetic circuits. ·Guides the reader towards layout design and simulation in QCADesigner.
Download or read book Microwave De embedding written by Gilles Dambrine and published by Elsevier Inc. Chapters. This book was released on 2013-11-09 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter aims to describe experimental tools and techniques used for on-wafer millimeter (mm)-wave characterizations of silicon-based devices under the small-signal regime. We discuss the basics of scattering parameters (S parameters), high-frequency (HF) noise concept and measurement facilities, and expert details concerning experimental procedures. In this chapter, we describe first the basic notions of the S-parameters concept and its limitations, as well of as those HF noise. Secondly, the main experimental tools such as mm-wave vectorial network analyzer, noise setup, and on-wafer station are depicted. The third part concerns the description and the methodology of on-wafer calibration and de-embedding techniques applied for mm-wave advanced silicon devices. Finally, the last section focuses on the presentation and description of several examples of device characterizations. The main objective of this chapter is to propose a tradeoff between basic information and details of experience.
