Download or read book Cars Parts written by and published by . This book was released on 1986 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Car Hacker s Handbook written by Craig Smith and published by No Starch Press. This book was released on 2016-03-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.

Download or read book Using the Phone Book written by Patricia Parrott Gundlach and published by . This book was released on 1980 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Download or read book Corvette Black Book written by Mike Antonick and published by Motorbooks International. This book was released on 2001-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1953, the Corvette has been the quintessential, and some argue only, American sports car. Corvette Black Book is the premiere resource for enthusiasts and collectors (0-933534-47-7, 2001 Edition), packing a ton of information and taking readers on a year-by-year journey through the history of Corvette production, culminating with the 2002 model-year. For each car the author includes not only VINs, but specifications for engine blocks, heads, carburetors, alternators and distributors. Also provided are each year's base model and option prices, as well as charts of color codes. In addition, the there's a brief Corvette history and a photograph for every model year.

Download or read book Electric and Hybrid Cars written by Curtis D. Anderson and published by McFarland. This book was released on 2010-03-30 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illustrated history chronicles electric and hybrid cars from the late 19th century to today's fuel cell and plug-in automobiles. It describes the politics, technology, marketing strategies, and environmental issues that have impacted electric and hybrid cars' research and development. The important marketing shift from a "woman's car" to "going green" is discussed. Milestone projects and technologies such as early batteries, hydrogen and bio-mass fuel cells, the upsurge of hybrid vehicles, and the various regulations and market forces that have shaped the industry are also covered.

Download or read book Plasma Processes and Polymers written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles essential contributions to the most innovative fields of Plasma Processes and Polymers. High-quality contributions cover the fields of plasma deposition, plasma treatment of polymers and other organic compounds, plasma processes under partial vacuum and at atmospheric pressure, biomedical, textile, automotive, and optical applications as well as surface treatment of bulk materials, clusters, particles and powders. This unique collection of refereed papers is based on the best contributions presented at the 16th International Symposium on Plasma Chemistry in Taormina, Italy (ISPC-16, June 2003). A high class reference of relevance to a large audience in plasma community as well as in the area of its industrial applications.

Download or read book Materials Processing Fundamentals written by Lifeng Zhang and published by Springer. This book was released on 2016-12-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non-ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile-environment materials processes, online sampling and analysis techniques, and models for real-time process control and quality monitoring systems.

Download or read book Welding Engineering written by David H. Phillips and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles

Download or read book Glossary of Automotive Terms written by Society of Automotive Engineers and published by . This book was released on 1988 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive glossary brings together in one handy volume over 10,500 current automotive terms. From "A-pillar'' to "Zones of Reach'' the Glossary provides you with over 500 pages of alphabetically listed definitions collected from the SAE Handbook. For further research each definition references the SAE standard or specification from which it was taken. The new Glossary of Automotive Terms is an essential reference for anyone in the industry.

Download or read book Camaro 2016 written by Larry Edsall and published by Motorbooks International. This book was released on 2016-08 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In anticipation of the Camaro's 50th anniversary, GM has prepared a significantly revised, sixth-generation car to take on Ford's latest 2015 Mustang. Featuring revised bodywork, a new chassis platform, expanded and new driveline options, and a reworked interior, the new Camaro raises the bar and again puts Mustang on the defensive. This book tells the complete story of the new sixth-generation Camaro, available just in time to celebrate the model's anniversary. Featuring exclusive interviews with engineers, designers, and other Camaro team members, as well as more than 300 behind-the-scenes photographs, the book offers readers an intimate Camaro experience"--Adapted from Amazon.com.

Download or read book Lithium ion Batteries written by and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the first machine-generated scientific book in chemistry published by Springer Nature. Serving as an innovative prototype defining the current status of the technology, it also provides an overview about the latest trends of lithium-ion batteries research. This book explores future ways of informing researchers and professionals. State-of-the-art computer algorithms were applied to: select relevant sources from Springer Nature publications, arrange these in a topical order, and provide succinct summaries of these articles. The result is a cross-corpora auto-summarization of current texts, organized by means of a similarity-based clustering routine in coherent chapters and sections. This book summarizes more than 150 research articles published from 2016 to 2018 and provides an informative and concise overview of recent research into anode and cathode materials as well as further aspects such as separators, polymer electrolytes, thermal behavior and modelling. With this prototype, Springer Nature has begun an innovative journey to explore the field of machine-generated content and to find answers to the manifold questions on this fascinating topic. Therefore it was intentionally decided not to manually polish or copy-edit any of the texts so as to highlight the current status and remaining boundaries of machine-generated content. Our goal is to initiate a broad discussion, together with the research community and domain experts, about the future opportunities, challenges and limitations of this technology."--Publisher's website.

Download or read book Containment Systems written by Nigel Hirst and published by IChemE. This book was released on 2002 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the manufacture of new toxic pharmaceutical products grows, it is necessary to handle more compounds of increasing toxicity in the workplace. For this reason, and because the expectation of better employee protection and improved working procedures is growing, there is an increasing demand for better containment systems and a better understanding of those systems.

Download or read book 88 Instruments written by Chris Barton and published by Knopf Books for Young Readers. This book was released on 2016-08-16 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The rhythmic, onomatopoeic text dances across exuberant watercolors with lots of movement. This celebration of a child’s agency in choosing a means of artistic expression strikes just the right note." --Kirkus "A delightful offering for reading aloud, especially during music-themed storytimes." --School Library Journal From New York Times bestselling author Chris Barton and new illustrator Louis Thomas comes a fun, rhythmic picture book about finding the music that is perfect for you! A boy who loves to make noise gets to pick only one instrument (at his parents urging) in a music store, but there is too much to choose from! There’s triangles and sousaphones! There’s guitars and harpsichords! Bagpipes and cellos and trombones! How can he find the one that is just right for him out of all those options?

Download or read book Chilton s General Motors Full Size Trucks written by Thomas A. Mellon and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Covers all U.S. and Canadian models of Chevrolet/GMC pick-ups, Sierra, Blazer, Tahoe, Yukon and Suburban; 2 and 4 wheel drive, gasoline and diesel engines"--Cover

Download or read book Uses of Ionizing Radiation for Tangible Cultural Heritage Conservation written by International Atomic Energy Agency and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preservation of world cultural heritage is a key issue for maintaining national identity and understanding the influences or exchanges among civilizations throughout history. Development of appropriate preservation techniques that do not compromise longevity or authenticity are therefore of utmost importance. Radiation techniques have demonstrated significant success in the disinfestation and preservation of cultural heritage artefacts, and national and international research programmes have developed harmonized methodologies for such radiation treatment. This publication provides state of the art knowledge on radiation technology applied to the conservation and consolidation of items of cultural heritage and will be of use to collection curators, conservators, restorers, registrars, art historians, archaeologists and conservation scientists active in the various fields of cultural heritage in museums, libraries, archives, archaeological institutions, historical buildings and conservation workshops.

Download or read book How to Survive The End Of The World As We Know It written by James Wesley, Rawles and published by Penguin UK. This book was released on 2010-01-07 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: WOULD YOU SURVIVE THE APOCALYPSE? INTRODUCING THE DEFINITIVE GUIDE FOR PREPPERS AND SURVIVALISTS. 'Save those wine corks. Burned cork makes quick and cheap face camouflage.' Financial crash. Terrorist attack. Flu pandemic. Just ONE unthinkable event could disrupt our way of life - and force us to fend for ourselves. Where would you get water? How would you communicate? What would you use for fuel? Survivalist expert and former US Army Intelligence officer James Wesley, Rawles shares the essential tools and skills you will need to survive. SURVIVAL: Know what to do should the worst happen FOOD AND WATER: Store food, rear animals and find drinkable water SHELTER: Discover how to find and build yourself a retreat HEALTH & SAFETY Learn how to perform minor surgeries and defend yourself COMMUNICATIONS: The best ways to stay in touch with loved ones How to Survive the End of the World As We Know it is a MUST-HAVE for these unsettling times.