Download or read book 2013 4th International Symposium on Electrical and Electronics Engineering ISEEE written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISEEE 2013 written by Marian Găiceanu and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2013 4th International Symposium on Electrical and Electronics Engineering ISEEE written by IEEE Staff and published by . This book was released on 2013-10-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium is intended as an international forum where an effective exchange of knowledge and experience amongst researchers active in various theoretical and applied areas of electrical and electronics engineering, power electronics and telecommunications, control systems and computational intelligence can take place The objective of the third symposium is oriented but not limited to the paradigm of interdependency between electrical and electronic systems The symposium will provide presentations on the latest trends, in depth knowledge about achieving the highest level of technology in the field The event will also provide a variety of workshops, discussions, and exhibitions to fully immerse the attendees in the Symposium pleasant atmosphere
Download or read book Proceedings of IAC EIaT 2014 written by collective of authors and published by Czech Institute of Academic Education z.s.. This book was released on 2014-12-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings - International Academic Conference on Engineering, Internet and Technology in Prague 2014 (IAC-EIaT 2014 in Prague), Friday - Saturday, December 12 - 13, 2014
Download or read book Green Energy Advances written by Diana Enescu and published by . This book was released on 2019-02 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes to understanding the development and application of green energy solutions. The term ""green energy"" is widely used today to indicate sustainable energy sources with zero or minimal environmental and economic impact, obtained from various renewable energy sources. The contents presented in this book deal with different solutions, from small-scale applications (thermoelectric energy harvesting) to energy efficiency in buildings with local renewable energy production (also in critical seismic sites), local energy systems (smart energy management of storage and complex interactions), exploitation of biomasses from agricultural wastes, and voluntary certifications associated with energy trading in large energy systems. These aspects mark a more sustainable evolution of the society with wider green energy usage.
Download or read book Internet of Nano Things and Wireless Body Area Networks WBAN written by Fadi Al-Turjman and published by CRC Press. This book was released on 2019-05-13 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet of Nano-Things (IoNT) is a system of nano-connected devices, objects, or organisms that have unique identifiers to transfer data over a computer or cellular network wirelessly to the Cloud. Data delivery, caching, and energy consumption are among the most significant topics in the IoNT nowadays. The book addresses data routing and energy consumption challenges and proposes nano-sensing platforms in critical Wireless Body Area Networks (WBAN). This book covers both design and implementation aspects of data delivery models and strategies in a smart application enabled by the WBAN. It focuses on smart data delivery approaches and energy savings aspects in a reliable IoNT systems.
Download or read book PHealth 2016 written by N. Maglaveras and published by IOS Press. This book was released on 2016-06-16 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart mobile systems, eHealth and telemedicine, as well as social media and gamification, have all become important enablers for the provision of the next generation of health services. This book presents the proceedings of the 13th International Conference on Wearable, Micro and Nano Technologies for Personalised Health (pHealth 2016), held in Heraklion, Crete, in May 2016. pHealth 2016 brings together experts from medical, technological, political, administrative, legal and social domains with the aim of further emphasizing the integration of biology and medical data, systems and information using mobile technologies. The book includes two keynotes and two specially invited talks as well as 21 oral and 10 poster presentations selected by a rigorous review process (with a rejection rate of more than 30%) from the more than 45 submissions to the conference. The book is divided into two sections. The first covers mHealth, devices, applications and biosensors and the second deals with smart personal health systems, deep learning, interoperability and precision medicine. Subjects covered include the development of micro-, nano-, bio- and smart-systems with an emphasis on personalized health, virtual care, precision medicine, big bio data management and analytics, as well as security, privacy and safety issues. This book will be of interest to all those whose work involves the provision of healthcare, both today and into the future.
Download or read book Transmission Expansion Planning The Network Challenges of the Energy Transition written by Sara Lumbreras and published by Springer Nature. This book was released on 2020-11-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a panoramic look at the transformation of the transmission network in the context of the energy transition. It provides readers with basic definitions as well as details on current challenges and emerging technologies. In-depth chapters cover the integration of renewables, the particularities of planning large-scale systems, efficient reduction and solution methods, the possibilities of HVDC and super grids, distributed generation, smart grids, demand response, and new regulatory schemes. The content is complemented with case studies that highlight the importance of the power transmission network as the backbone of modern energy systems. This book will be a comprehensive reference that will be useful to both academics and practitioners.
Download or read book Operation Construction and Functionality of Direct Current Machines written by Amin, Muhammad and published by IGI Global. This book was released on 2015-04-30 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct current machines are a quickly evolving domain whose applications affect many aspects of modern life from computers and printers to toys, electric vehicles, and traction applications. As their many uses continue to grow, it has become apparent that understanding these machines is the key to understanding our future. Operation, Construction, and Functionality of Direct Current Machines brings together many concepts, from the most basic working principles and construction of DC machines to more advanced topics such as electro-magnetism, armature reaction, parallel operations, and many more. Highlighting theoretical concepts and numerical problems, this book is an essential reference source for students, educators, and anyone interested in the field of electric machines.
Download or read book Design for Micro Combined Cooling Heating and Power Systems written by Nicolae Badea and published by Springer. This book was released on 2014-09-25 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a manual for the technical and structural design of systems for supplying decentralised energy in residential buildings. It presents the micro-combined cooling, heating & power systems Stirling engines & renewable energy sources (mCCHP-SE-RES) systems in an accessible manner both for the public at large, and for professionals who conceive, design or commercialise such systems or their components. The high performance levels of these systems are demonstrated within the final chapter by the results of an experiment in which a house is equipped with a mCCHP-SE-RES system. The reader is also familiarized with the conceptual, technical and legal aspects of modern domestic energy systems; the components that constitute these systems; and advanced algorithms for achieving the structural and technical design of such systems. In residential buildings, satisfying demands of durable development has gradually evolved from necessity to obligation and institutionalisation. Consequently a major paradigm change has appeared in the supply of energy to residential buildings, from the centralised production of energy using fossil fuels to the decentralised production of energy using local renewable sources. Furthermore, on the energy system market, energy micro systems which use renewable energy sources are increasingly commercialised. From among these, the mCCHP-SE-RES systems are particularly striking because they offer a high performance and they enhance the relationship between humans and the environment. This book is intended for postgraduate students of electrical engineering, applied mathematicians, and researchers of modelling and control of complex systems or power system technologies.
Download or read book Soft Computing Applications written by Valentina Emilia Balas and published by Springer. This book was released on 2017-08-31 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes constitute the Proceedings of the 7th International Workshop on Soft Computing Applications (SOFA 2016), held on 24–26 August 2016 in Arad, Romania. This edition was organized by Aurel Vlaicu University of Arad, Romania, University of Belgrade, Serbia, in conjunction with the Institute of Computer Science, Iasi Branch of the Romanian Academy, IEEE Romanian Section, Romanian Society of Control Engineering and Technical Informatics (SRAIT) - Arad Section, General Association of Engineers in Romania - Arad Section, and BTM Resources Arad. The soft computing concept was introduced by Lotfi Zadeh in 1991 and serves to highli ght the emergence of computing methodologies in which the accent is on exploiting the tolerance for imprecision and uncertainty to achieve tractability, robustness and lower costs. Soft computing facilitates the combined use of fuzzy logic, neurocomputing, evolutionary computing and probabilistic computing, leading to the concept of hybrid intelligent systems. The rapid emergence of new tools and applications calls for a synergy of scientific and technological disciplines in order to reveal the great potential of soft computing in all domains. The conference papers included in these proceedings, published post-conference, were grouped into the following areas of research: • Methods and Applications in Electrical Engineering • Knowledge-Based Technologies for Web Applications, Cloud Computing, Security Algorithms and Computer Networks • Biomedical Applications • Image, Text and Signal Processing • Machine Learning and Applications • &nb sp; Business Process Management • Fuzzy Applications, Theory and Fuzzy Control • Computational Intelligence in Education • Soft Computing & Fuzzy Logic i n Biometrics (SCFLB) • Soft Computing Algorithms Applied in Economy, Industry and Communication Technology • Modelling and Applications in Textiles The book helps to disseminate advances in selected active research directions in the field of soft computing, along with current issues and applications of related topics. As such, it provides valuable information for professors, researchers and graduate students in the area of soft computing techniques and applications.
Download or read book Improving Disaster Resilience and Mitigation IT Means and Tools written by Horia-Nicolai Teodorescu and published by Springer. This book was released on 2014-09-08 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this volume is comprised of the fundamentals, models, and information technologies (IT) methods and tools for disaster prediction and mitigation. A more detailed list of topics includes mathematical and computational modeling of processes leading to or producing disasters, modeling of disaster effects, IT means for disaster mitigation, including data mining tools, knowledge-based and expert systems for use in disaster circumstances, GIS-based systems for disaster prevention and mitigation and equipment for disaster-prone areas. A specific type or class of disasters (natural or human-made), however will not be part of the main focus of this work. Instead, this book was conceived to offer a comprehensive, integrative view on disasters, seeking to determine what various disasters have in common. Because disaster resilience and mitigation involve humans, societies and cultures, not only technologies and economic models, special attention was paid in this volume to gain a comprehensive view on these issues, as a foundation of the IT tool design.
Download or read book Cyber physical Systems and Digital Twins written by Michael E. Auer and published by Springer. This book was released on 2019-07-10 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 16th International Conference on Remote Engineering and Virtual Instrumentation (REV), held at the BMS College of Engineering, Bangalore, India on 3–6 February 2019. Today, online technologies are at the core of most fields of engineering, as well as of society as a whole, and are inseparably connected with Internet of Things, cyber-physical systems, collaborative networks and grids, cyber cloud technologies, service architectures, to name but a few. Since it was first held in, 2004, the REV conference has focused on the increasing use of the Internet for engineering tasks and the problems surrounding it. The 2019 conference demonstrated and discussed the fundamentals, applications and experiences in the field of online engineering and virtual instrumentation. It also presented guidelines for university-level courses on these topics, in view of the increasing globalization of education and the demand for teleworking, remote services and collaborative working environments.
Download or read book Real Life Applications of the Internet of Things written by Monika Mangla and published by CRC Press. This book was released on 2022-08-01 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume provides an overview of the Internet of Things along with its architectures, its vital technologies, and their uses in our daily life. The book explores the integration of IoT with other emerging technologies, such as blockchain and cloud. Topics in the volume cover the many powerful features and applications of IoT, such as for weather forecasting, in agriculture, in medical science, in surveillance systems, and much more. The first section of the book covers many of the issues and challenges that arise from the Internet of Things (IoT), exploring security challenges, such as attack detection and prevention systems, as well as energy efficiency and resource management in IoT. The volume also introduces the use of IoT and smart technology in agricultural management, in healthcare diagnosis and monitoring, and in the financial industry. Chapters also focus on surveillance network technology, the technology shift from television to video streaming apps, using IoT–fog computing for smart healthcare, detection of anomalies in climate conditions, and even detection of illegal wood logging activity.
Download or read book Technological Innovation for the Internet of Things written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-04-15 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2013, held in Costa de Caparica, Portugal, in April 2013. The 69 revised full papers were carefully reviewed and selected from numerous submissions. They cover a wide spectrum of topics ranging from collaborative enterprise networks to microelectronics. The papers are organized in the following topical sections: collaborative enterprise networks; service orientation; intelligent computational systems; computational systems; computational systems applications; perceptional systems; robotics and manufacturing; embedded systems and Petri nets; control and decision; integration of power electronics systems with ICT; energy generation; energy distribution; energy transformation; optimization techniques in energy; telecommunications; electronics: devices design; electronics: amplifiers; electronics: RF applications; and electronics: applications.
Download or read book Interactive Collaborative Robotics written by Andrey Ronzhin and published by Springer. This book was released on 2018-09-10 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Third International Conference on Interactive Collaborative Robotics, ICR 2018, held in Leipzig, Germany, in September 2018, as a satellite event of the 20th International Conference on Speech and Computer, SPECOM 2018. The 30 papers presented in this volume were carefully reviewed and selected from 51 submissions. The papers presents challenges of human-robot interaction, robot control and behavior in social robotics and collaborative robotics, as well as applied robotic and cyberphysical systems.
Download or read book Rough Sets written by Mengjun Hu and published by Springer Nature. This book was released on with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
