Download or read book 2012 International Conference on Control Automation and Information Sciences written by IEEE Electrical Insulation Society Staff and published by . This book was released on 2012-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2012 International Conference on Control Automation and Information Sciences ICCAIS written by and published by . This book was released on 2012 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Informatics in Control Automation and Robotics written by Jean-Louis Ferrier and published by Springer Science & Business Media. This book was released on 2014-01-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes extended and revised versions of a set of selected papers from the Ninth International Conference on Informatics in Control Automation and Robotics (ICINCO 2012), held in Rome, Italy, from 28 to 31 July 2012. The conference was organized in four simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, Systems Modeling, Signal Processing and Control and Industrial Engineering, Production and Management. ICINCO 2012 received 360 paper submissions, from 58 countries in all continents. From these, after a blind review process, only 40 were accepted as full papers, of which 20 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference as well as the logic equilibrium between the four abovementioned tracks. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends.
Download or read book Proceedings of the 2012 International Conference on Communication Electronics and Automation Engineering written by George Yang and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected papers from the 2011 International Conference on Communications, Electronics and Automation Engineering hold in Xi’an, China, August 23-25, 2012. It presents some of the latest research findings in a broad range of interdisciplinary fields related to communications, electronics and automation engineering. Specific emphasis is placed on the following topics: automation control, data mining and statistics, simulation and mathematical modeling, human factors and cognitive engineering, web technology, optimization and algorithm, and network communications. The prime objective of the book is to familiarize the readers with cutting edge developments in the research of electronics and automation engineering with a variety of applications. Hopefully, the book can help researchers to identify research trends in many areas, to learn the new methods and tools, and to spark innovative ideas.
Download or read book Control and Information Sciences written by V. I. George and published by Springer Nature. This book was released on with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2022-01-01 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses the latest endeavours relating researches and developments conducted in fields of Control, Robotics and Automation. Through more than ten revised and extended articles, the present book aims to provide the most up-to-date state-of-art of the aforementioned fields allowing researcher, PhD students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2011-03-15 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the fourth “International Conference on Informatics in Control Automation and Robotics” (ICINCO 2009), held in Milan, Italy, from 2 to 5 July 2009. The conference was organized in three simultaneous tracks: “Intelligent Control Systems and Optimization”, “Robotics and Automation” and “Systems Modeling, Signal Processing and Control”. The book is based on the same structure. ICINCO received 365 paper submissions, not including those of workshops, from 55 countries, in all continents. After a double blind paper review performed by the Program Committee only 34 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 9%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2009. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2008-05-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the third “International Conference on Informatics in Control Automation and Robotics” (ICINCO 2006), held in Setúbal, Portugal, from 1 to 5 August 2006, sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). The conference was organized in three simultaneous tracks: “Intelligent Control Systems and Optimization”, “Robotics and Automation” and “Systems Modeling, Signal Processing and Control”. The book is based on the same structure. Although ICINCO 2006 received 309 paper submissions, from more than 50 different countries in all continents, only 31 where accepted as full papers. From those, only 23 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers also reflect the interdisciplinary nature of the conference. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends. These high quality standards will be maintained and reinforced at ICINCO 2007, to be held in Angers, France, and in future editions of this conference.
Download or read book The Tactile Internet written by Tara Ali-Yahiya and published by John Wiley & Sons. This book was released on 2021-12-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tactile Internet will change the landscape of communication by introducing a new paradigm that enables the remote delivery of haptic data. This book answers the many questions surrounding the Tactile Internet, including its reference architecture and adapted compression methods for conveying haptic information. It also describes the key enablers for deploying the applications of the Tactile Internet. As an antecedent technology, the IoT is tackled, explaining the differences and similarities between the Tactile Internet, the Internet of Things and the Internet of Everything. The essentials of teleoperation systems are summarized and the challenges that face this paradigm in its implementation and deployment are also discussed. Finally, a teleoperation case study demonstrating an application of the Tactile Internet is investigated to demonstrate its functionalities, architecture and performance.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics" (ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Download or read book Information Security written by Phong Q. Nguyen and published by Springer. This book was released on 2017-11-13 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Information Security, ISC 2017, held in Ho Chi Minh City, Vietnam, in November 2017. The 25 revised full papers presented were carefully reviewed and selected from 97 submissions. The papers are organized in topical sections on symmetric cryptography, post-quantum cryptography, public-key cryptography, authentication, attacks, privacy, mobile security, software security, and network and system security.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2009-04-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the Fifth International Conf- ence on Informatics in Control Automation and Robotics (ICINCO 2008), held in Funchal, Madeira - Portugal, from 11 to 15 May 2008. The conference was organized in three simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, and Systems Modeling, Signal Processing and Control. The book is based on the same structure. ICINCO 2008 received 392 paper submissions, from more than 50 different co- tries in all continents. From these, after a blind review process, only 33 where - cepted as full papers, of which 18 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference. The diversity of topics is an important feature of this conference, enabling an overall perception of several important sci- tific and technological trends. These high quality standards will be maintained and reinforced at ICINCO 2009, to be held in Milan, Italy, and in future editions of this conference.
Download or read book Robot Intelligence Technology and Applications written by Jong-Hwan Kim and published by Springer. This book was released on 2019-04-12 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the 6th International Conference on Robot Intelligence Technology and Applications, RiTA 2018, held in Putrajaya, Malaysia, in December 2018. The 20 full papers presented in this volume were carefully reviewed and selected from 80 submissions. The papers present studies on machine learning; optimization; modelling and simulation; path planning; neural networks; landmark recognition; and reinforcement learning.
Download or read book Advanced Computational Intelligence for Object Detection Feature Extraction and Recognition in Smart Sensor Environments written by Marcin Woźniak and published by MDPI. This book was released on 2021-09-01 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen a vast development in various methodologies for object detection and feature extraction and recognition, both in theory and in practice. When processing images, videos, or other types of multimedia, one needs efficient solutions to perform fast and reliable processing. Computational intelligence is used for medical screening where the detection of disease symptoms is carried out, in prevention monitoring to detect suspicious behavior, in agriculture systems to help with growing plants and animal breeding, in transportation systems for the control of incoming and outgoing transportation, for unmanned vehicles to detect obstacles and avoid collisions, in optics and materials for the detection of surface damage, etc. In many cases, we use developed techniques which help us to recognize some special features. In the context of this innovative research on computational intelligence, the Special Issue “Advanced Computational Intelligence for Object Detection, Feature Extraction and Recognition in Smart Sensor Environments” present an excellent opportunity for the dissemination of recent results and achievements for further innovations and development. It is my pleasure to present this collection of excellent contributions to the research community. - Prof. Marcin Woźniak, Silesian University of Technology, Poland –
Download or read book Future Information Technology II written by James J. (Jong Hyuk) Park and published by Springer. This book was released on 2015-01-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains. This book aims to provide a complete coverage of the areas outlined and to bring together the researchers from academic and industry as well as practitioners to share ideas, challenges, and solutions relating to the multifaceted aspects of this field.
Download or read book Control Engineering and Information Systems written by Zhijing Liu and published by CRC Press. This book was released on 2015-01-19 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Engineering and Information Systems contains the papers presented at the 2014 International Conference on Control Engineering and Information Systems (ICCEIS 2014, Yueyang, Hunan, China, 20-22 June 2014). All major aspects of the theory and applications of control engineering and information systems are addressed, including: – Intelligent systems – Teaching cases – Pattern recognition – Industry application – Machine learning – Systems science and systems engineering – Data mining – Optimization – Business process management – Evolution of public sector ICT – IS economics – IS security and privacy – Personal data markets – Wireless ad hoc and sensor networks – Database and system security – Application of spatial information system – Other related areas Control Engineering and Information Systems provides a valuable source of information for scholars, researchers and academics in control engineering and information systems.
Download or read book Control and Automation written by Dominik Slezak and published by Springer. This book was released on 2010-01-12 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: As future generation information technology (FGIT) becomes specialized and fr- mented, it is easy to lose sight that many topics in FGIT have common threads and, because of this, advances in one discipline may be transmitted to others. Presentation of recent results obtained in different disciplines encourages this interchange for the advancement of FGIT as a whole. Of particular interest are hybrid solutions that c- bine ideas taken from multiple disciplines in order to achieve something more signi- cant than the sum of the individual parts. Through such hybrid philosophy, a new principle can be discovered, which has the propensity to propagate throughout mul- faceted disciplines. FGIT 2009 was the first mega-conference that attempted to follow the above idea of hybridization in FGIT in a form of multiple events related to particular disciplines of IT, conducted by separate scientific committees, but coordinated in order to expose the most important contributions. It included the following international conferences: Advanced Software Engineering and Its Applications (ASEA), Bio-Science and Bio-Technology (BSBT), Control and Automation (CA), Database Theory and Application (DTA), D- aster Recovery and Business Continuity (DRBC; published independently), Future G- eration Communication and Networking (FGCN) that was combined with Advanced Communication and Networking (ACN), Grid and Distributed Computing (GDC), M- timedia, Computer Graphics and Broadcasting (MulGraB), Security Technology (SecTech), Signal Processing, Image Processing and Pattern Recognition (SIP), and- and e-Service, Science and Technology (UNESST).
