Download or read book 2010 International Conference on Future Control and Automation written by IEEE Staff and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Control and Automation written by Wei Deng and published by Springer Science & Business Media. This book was released on 2012-07-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume Future Control and Automation- Volume 2 includes best papers from 2012 2nd International Conference on Future Control and Automation (ICFCA 2012) held on July 1-2, 2012, Changsha, China. Future control and automation is the use of control systems and information technologies to reduce the need for human work in the production of goods and services. This volume can be divided into six sessions on the basis of the classification of manuscripts considered, which is listed as follows: Mathematical Modeling, Analysis and Computation, Control Engineering, Reliable Networks Design, Vehicular Communications and Networking, Automation and Mechatronics.
Download or read book Future Control and Automation written by Wei Deng and published by Springer Science & Business Media. This book was released on 2012-06-26 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume Future Control and Automation- Volume 1 includes best papers selected from 2012 2nd International Conference on Future Control and Automation (ICFCA 2012) held on July 1-2, 2012, Changsha, China. Future control and automation is the use of control systems and information technologies to reduce the need for human work in the production of goods and services. This volume can be divided into five sessions on the basis of the classification of manuscripts considered, which is listed as follows: Identification and Control, Navigation, Guidance and Sensor, Simulation Technology, Future Telecommunications and Control
Download or read book 2010 International Conference on Control Automation and Systems written by IEEE Staff and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2010 International Conference on Control Automation and Systems ICCAS 2010 written by Chengŏ-Robot-Sisŭt'em-Hakhoe and published by . This book was released on 2010 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Automation written by Dominik Slezak and published by Springer. This book was released on 2010-01-12 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: As future generation information technology (FGIT) becomes specialized and fr- mented, it is easy to lose sight that many topics in FGIT have common threads and, because of this, advances in one discipline may be transmitted to others. Presentation of recent results obtained in different disciplines encourages this interchange for the advancement of FGIT as a whole. Of particular interest are hybrid solutions that c- bine ideas taken from multiple disciplines in order to achieve something more signi- cant than the sum of the individual parts. Through such hybrid philosophy, a new principle can be discovered, which has the propensity to propagate throughout mul- faceted disciplines. FGIT 2009 was the first mega-conference that attempted to follow the above idea of hybridization in FGIT in a form of multiple events related to particular disciplines of IT, conducted by separate scientific committees, but coordinated in order to expose the most important contributions. It included the following international conferences: Advanced Software Engineering and Its Applications (ASEA), Bio-Science and Bio-Technology (BSBT), Control and Automation (CA), Database Theory and Application (DTA), D- aster Recovery and Business Continuity (DRBC; published independently), Future G- eration Communication and Networking (FGCN) that was combined with Advanced Communication and Networking (ACN), Grid and Distributed Computing (GDC), M- timedia, Computer Graphics and Broadcasting (MulGraB), Security Technology (SecTech), Signal Processing, Image Processing and Pattern Recognition (SIP), and- and e-Service, Science and Technology (UNESST).
Download or read book Grid and Distributed Computing Control and Automation written by Stephen S. Yau and published by Springer. This book was released on 2011-03-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of the 2010 International Conferences on Grid and D- tributed Computing (GDC 2010), and Control and Automation (CA 2010) – two of the partnering events of the Second International Mega-Conference on Future Gene- tion Information Technology (FGIT 2010). GDC and CA bring together researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted - pects of high-performance and compound control systems, including their links to computational sciences, mathematics and information technology. In total, 1,630 papers were submitted to FGIT 2010 from 30 countries, which - cludes 198 papers submitted to GDC/CA 2010. The submitted papers went through a rigorous reviewing process: 395 of the 1,630 papers were accepted for FGIT 2010, while 40 papers were accepted for GDC/CA 2010. Of the 40 papers, 8 were selected for the special FGIT 2010 volume published by Springer in LNCS the series. 28 papers are published in this volume, and 4 papers were withdrawn due to technical reasons. We would like to acknowledge the great effort of the GDC/CA 2010 International Advisory Boards and members of the International Program Committees, as well as all the organizations and individuals who supported the idea of publishing this volume of proceedings, including SERSC and Springer. Also, the success of these two c- ferences would not have been possible without the huge support from our sponsors and the work of the Chairs and Organizing Committee.
Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2022-01-01 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses the latest endeavours relating researches and developments conducted in fields of Control, Robotics and Automation. Through more than ten revised and extended articles, the present book aims to provide the most up-to-date state-of-art of the aforementioned fields allowing researcher, PhD students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer. This book was released on 2011-10-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics" (ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Download or read book Future Generation Information Technology written by Jung-Hyun Lee and published by Springer. This book was released on 2010-11-26 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: As information technology (IT) becomes specialized and fragmented, it is easy to lose sight that many topics have common threads and because of this, advances in one s- discipline may transmit to another. The presentation of results between different s- disciplines encourages this interchange for the advancement of IT as a whole. This volume comprises the selection of papers presented at the Second International Mega-Conference on Future Generation Information Technology (FGIT 2010), composed of the following 11 international conferences: Advanced Software Engineering and Its Applications (ASEA 2010), Bio-Science and Bio- Technology (BSBT 2010), Control and Automation (CA 2010), Disaster Recovery and Business Continuity (DRBC 2010), Database Theory and Application (DTA 2010), Future Generation Communication and Networking (FGCN 2010), Grid and Distributed Computing (GDC 2010), Multimedia, Computer Graphics and Broadcasting (MulGraB 2010), Security Technology (SecTech 2010), Signal Processing, Image Processing and Pattern Recognition (SIP 2010), as well as u- and e-Service, Science and Technology (UNESST 2010). In total, 1,630 papers were submitted to FGIT 2010 from 30 countries. The submitted papers went through a rigorous reviewing process and 395 papers were accepted. Of these 395 papers, 60 were assigned to this volume. In addition, this volume contains 7 invited papers and abstracts. Of the remaining accepted papers, 269 were distributed among 8 volumes of proceedings published by Springer in the CCIS series. 66 papers were withdrawn due to technical reasons.
Download or read book Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems ICITES2013 written by Jengnan Juang and published by Springer Science & Business. This book was released on 2014-04-18 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer reviewed research papers from the conference, Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications and structure dynamics and control.
Download or read book Control and Automation and Energy System Engineering written by Tai-hoon Kim and published by Springer. This book was released on 2011-12-02 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected papers of the International Conferences, CA and CES3 2011, held as Part of the Future Generation Information Technology Conference, FGIT 2011, in Conjunction with GDC 2011, Jeju Island, Korea, in December 2011. The papers presented were carefully reviewed and selected from numerous submissions and focuse on the various aspects of control and automation, and circuits, control, communication, electricity, electronics, energy, system, signal and simulation.
Download or read book Future Control and Automation written by Wei Deng and published by Springer. This book was released on 2012-07-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume Future Control and Automation- Volume 2 includes best papers from 2012 2nd International Conference on Future Control and Automation (ICFCA 2012) held on July 1-2, 2012, Changsha, China. Future control and automation is the use of control systems and information technologies to reduce the need for human work in the production of goods and services. This volume can be divided into six sessions on the basis of the classification of manuscripts considered, which is listed as follows: Mathematical Modeling, Analysis and Computation, Control Engineering, Reliable Networks Design, Vehicular Communications and Networking, Automation and Mechatronics.
Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer. This book was released on 2010-11-10 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market demand for skills, knowledge and adaptability have positioned robotics to be an important field in both engineering and science. One of the most highly visible applications of robotics has been the robotic automation of many industrial tasks in factories. In the future, a new era will come in which we will see a greater success for robotics in non-industrial environments. In order to anticipate a wider deployment of intelligent and autonomous robots for tasks such as manufacturing, healthcare, ent- tainment, search and rescue, surveillance, exploration, and security missions, it is essential to push the frontier of robotics into a new dimension, one in which motion and intelligence play equally important roles. The 2010 International Conference on Intelligent Robotics and Applications (ICIRA 2010) was held in Shanghai, China, November 10–12, 2010. The theme of the c- ference was “Robotics Harmonizing Life,” a theme that reflects the ever-growing interest in research, development and applications in the dynamic and exciting areas of intelligent robotics. These volumes of Springer’s Lecture Notes in Artificial Intel- gence and Lecture Notes in Computer Science contain 140 high-quality papers, which were selected at least for the papers in general sessions, with a 62% acceptance rate Traditionally, ICIRA 2010 holds a series of plenary talks, and we were fortunate to have two such keynote speakers who shared their expertise with us in diverse topic areas spanning the rang of intelligent robotics and application activities.
Download or read book 2010 18th Mediterranean Conference on Control and Automation written by IEEE Staff and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management 2014 written by Ershi Qi and published by Springer. This book was released on 2015-01-06 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2014 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year and to propose prospects and vision for the further development.
Download or read book eIoT written by Steffi O. Muhanji and published by Springer. This book was released on 2019-02-20 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the collision between the sustainable energy transition and the Internet of Things (IoT). In that regard, this book’s arrival is timely. Not only is the Internet of Things for energy applications, herein called the energy Internet of Things (eIoT), rapidly developing but also the transition towards sustainable energy to abate global climate is very much at the forefront of public discourse. It is within the context of these two dynamic thrusts, digitization and global climate change, that the energy industry sees itself undergoing significant change in how it is operated and managed. This book recognizes that they impose five fundamental energy management change drivers: 1.) the growing demand for electricity, 2.) the emergence of renewable energy resources, 3.) the emergence of electrified transportation, 4.) the deregulation of electric power markets, 5.) and innovations in smart grid technology. Together, they challenge many of the assumptions upon which the electric grid was first built. The goal of this book is to provide a single integrated picture of how eIoT can come to transform our energy infrastructure. This book links the energy management change drivers mentioned above to the need for a technical energy management solution. It, then, describes how eIoT meets many of the criteria required for such a technical solution. In that regard, the book stresses the ability of eIoT to add sensing, decision-making, and actuation capabilities to millions or perhaps even billions of interacting “smart" devices. With such a large scale transformation composed of so many independent actions, the book also organizes the discussion into a single multi-layer energy management control loop structure. Consequently, much attention is given to not just network-enabled physical devices but also communication networks, distributed control & decision making, and finally technical architectures and standards. Having gone into the detail of these many simultaneously developing technologies, the book returns to how these technologies when integrated form new applications for transactive energy. In that regard, it highlights several eIoT-enabled energy management use cases that fundamentally change the relationship between end users, utilities, and grid operators. Consequently, the book discusses some of the emerging applications for utilities, industry, commerce, and residences. The book concludes that these eIoT applications will transform today’s grid into one that is much more responsive, dynamic, adaptive and flexible. It also concludes that this transformation will bring about new challenges and opportunities for the cyber-physical-economic performance of the grid and the business models of its increasingly growing number of participants and stakeholders.
