Download or read book Reliability Risk and Safety Three Volume Set written by Radim Bris and published by CRC Press. This book was released on 2009-08-20 with total page 2480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the 18th European Safety and Reliability Conference (Esrel 2009) in Prague, Czech Republic, September 2009, Reliability, Risk and Safety Theory and Applications will be of interest for academics and professionals working in a wide range of industrial and governmental sectors, including Aeronautics and Aerospace, Aut

Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.

Download or read book Design for Reliability written by Dev G. Raheja and published by John Wiley & Sons. This book was released on 2012-07-20 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, design-based approach to reliability engineering Design for Reliability provides engineers and managers with a range of tools and techniques for incorporating reliability into the design process for complex systems. It clearly explains how to design for zero failure of critical system functions, leading to enormous savings in product life-cycle costs and a dramatic improvement in the ability to compete in global markets. Readers will find a wealth of design practices not covered in typical engineering books, allowing them to think outside the box when developing reliability requirements. They will learn to address high failure rates associated with systems that are not properly designed for reliability, avoiding expensive and time-consuming engineering changes, such as excessive testing, repairs, maintenance, inspection, and logistics. Special features of this book include: A unified approach that integrates ideas from computer science and reliability engineering Techniques applicable to reliability as well as safety, maintainability, system integration, and logistic engineering Chapters on design for extreme environments, developing reliable software, design for trustworthiness, and HALT influence on design Design for Reliability is a must-have guide for engineers and managers in R&D, product development, reliability engineering, product safety, and quality assurance, as well as anyone who needs to deliver high product performance at a lower cost while minimizing system failure.

Download or read book Reliability Engineering written by Ilia Vonta and published by CRC Press. This book was released on 2018-10-03 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability theory is a multidisciplinary science aimed at developing complex systems that are resistant to failures. Reliability engineering has emerged as a main field not only for scientists and researchers, but also for engineers and industrial managers. This book covers the recent developments in reliability engineering. It presents new theoretical issues that were not previously published, as well as the solutions of practical problems and case studies illustrating the applications methodology. This book is written by a number of leading scientists, analysts, mathematicians, statisticians, and engineers who have been working on the front end of reliability science and engineering. Reliability Engineering: Theory and Applications covers the recent developments in reliability engineering. It presents new theoretical issues that were not previously presented in the literature, as well as the solutions of important practical problems and case studies illustrating the applications methodology. Features Covers applications to reliability engineering practice Discusses current advances and developments Introduces current achievements in the field Considers and analyses case studies along with real world examples Presents numerous examples to illustrate the theoretical results

Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi

Download or read book Gas and Oil Reliability Engineering written by Eduardo Calixto and published by Gulf Professional Publishing. This book was released on 2016-05-07 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas and Oil Reliability Engineering: Modeling and Analysis, Second Edition, provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs to stay competitive, especially while oil prices are low. Updated with relevant analysis and case studies covering equipment for both onshore and offshore operations, this reference provides the engineer and manager with more information on lifetime data analysis (LDA), safety integrity levels (SILs), and asset management. New chapters on safety, more coverage on the latest software, and techniques such as ReBi (Reliability-Based Inspection), ReGBI (Reliability Growth-Based Inspection), RCM (Reliability Centered Maintenance), and LDA (Lifetime Data Analysis), and asset integrity management, make the book a critical resource that will arm engineers and managers with the basic reliability principles and standard concepts that are necessary to explain their use for reliability assurance for the oil and gas industry. - Provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs - Presents practical knowledge with over 20 new internationally-based case studies covering BOPs, offshore platforms, pipelines, valves, and subsea equipment from various locations, such as Australia, the Middle East, and Asia - Contains expanded explanations of reliability skills with a new chapter on asset integrity management, relevant software, and techniques training, such as THERP, ASEP, RBI, FMEA, and RAMS

Download or read book Automotive Electronics Reliability written by Ronald K Jurgen and published by SAE International. This book was released on 2010-08-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle reliability problems continue to be the news because of major vehicle recalls from several manufacturers. This book includes 40 SAE technical papers, published from 2007 through 2010, that describe the latest research on automotive electronics reliability technology. This book will help engineers and researchers focus on the design strategies being used to minimize electronics reliability problems, and how to test and verify those strategies. After an overview of durability, risk assessment, and failure mechanisms, this book focuses on state-of-the-art techniques for reliability-based design, and reliability testing and verification. Topics include: powertrain control monitoring distributed automotive embedded systems model-based design x-by-wire systems battery durability design verification fault tree analysis The book also includes editor Ronald K. Jurgen’s introduction ,“Striving for Maximum Reliability in a Highly Complex Electronic Environment”, and a concluding section on the future of electronics reliability, including networking technology, domain control units, the use of AUTOSAR, and embedded software.

Download or read book Improving Product Reliability and Software Quality written by Mark A. Levin and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative guide to the effective design and production of reliable technology products, revised and updated While most manufacturers have mastered the process of producing quality products, product reliability, software quality and software security has lagged behind. The revised second edition of Improving Product Reliability and Software Quality offers a comprehensive and detailed guide to implementing a hardware reliability and software quality process for technology products. The authors – noted experts in the field – provide useful tools, forms and spreadsheets for executing an effective product reliability and software quality development process and explore proven software quality and product reliability concepts. The authors discuss why so many companies fail after attempting to implement or improve their product reliability and software quality program. They outline the critical steps for implementing a successful program. Success hinges on establishing a reliability lab, hiring the right people and implementing a reliability and software quality process that does the right things well and works well together. Designed to be accessible, the book contains a decision matrix for small, medium and large companies. Throughout the book, the authors describe the hardware reliability and software quality process as well as the tools and techniques needed for putting it in place. The concepts, ideas and material presented are appropriate for any organization. This updated second edition: Contains new chapters on Software tools, Software quality process and software security. Expands the FMEA section to include software fault trees and software FMEAs. Includes two new reliability tools to accelerate design maturity and reduce the risk of premature wearout. Contains new material on preventative maintenance, predictive maintenance and Prognostics and Health Management (PHM) to better manage repair cost and unscheduled downtime. Presents updated information on reliability modeling and hiring reliability and software engineers. Includes a comprehensive review of the reliability process from a multi-disciplinary viewpoint including new material on uprating and counterfeit components. Discusses aspects of competition, key quality and reliability concepts and presents the tools for implementation. Written for engineers, managers and consultants lacking a background in product reliability and software quality theory and statistics, the updated second edition of Improving Product Reliability and Software Quality explores all phases of the product life cycle.

Download or read book Nutritional Care of the Patient with Gastrointestinal Disease written by Alan L Buchman and published by CRC Press. This book was released on 2015-08-06 with total page 3428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This evidence-based book serves as a clinical manual as well as a reference guide for the diagnosis and management of common nutritional issues in relation to gastrointestinal disease. Chapters cover nutrition assessment; macro- and micronutrient absorption; malabsorption; food allergies; prebiotics and dietary fiber; probiotics and intestinal microflora; nutrition and GI cancer; nutritional management of reflux; nutrition in IBS and IBD; nutrition in acute and chronic pancreatitis; enteral nutrition; parenteral nutrition; medical and endoscopic therapy of obesity; surgical therapy of obesity; pharmacologic nutrition, and nutritional counseling.

Download or read book Solid State Lighting Reliability Part 2 written by Willem Dirk van Driel and published by Springer. This book was released on 2017-07-11 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past four years we have witnessed rapid development in technology and significant market penetration in many applications for LED systems. New processes and new materials have been introduced; new standards and new testing methods have been developed; new driver, control and sensing technologies have been integrated; and new and unknown failure modes have also been presented. In this book, Solid State Lighting Reliability Part 2, we invited the experts from industry and academia to present the latest developments and findings in the LED system reliability arena. Topics in this book cover the early failures and critical steps in LED manufacturing; advances in reliability testing and standards; quality of colour and colour stability; degradation of optical materials and the associated chromaticity maintenance; characterization of thermal interfaces; LED solder joint testing and prediction; common failure modes in LED drivers; root causes for lumen depreciation; corrosion sensitivity of LED packages; reliability management for automotive LEDs, and lightning effects on LEDs. This book is a continuation of Solid State Lighting Reliability: Components to Systems (published in 2013), which covers reliability aspects ranging from the LED to the total luminaire or system of luminaires. Together, these two books are a full set of reference books for Solid State Lighting reliability from the performance of the (sub-) components to the total system, regardless its complexity.

Download or read book Affordable Reliability Engineering written by William R. Wessels and published by CRC Press. This book was released on 2015-04-16 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: How Can Reliability Analysis Impact Your Company's Bottom Line?While reliability investigations can be expensive, they can also add value to a product that far exceeds its cost. Affordable Reliability Engineering: Life-Cycle Cost Analysis for Sustainability & Logistical Support shows readers how to achieve the best cost for design develo

Download or read book Scientific and Technological Advances in Materials for Energy Storage and Conversions written by Basant Singh Sikarwar and published by Springer Nature. This book was released on with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability Data Analysis with Excel and Minitab written by Kenneth S. Stephens and published by Quality Press. This book was released on 2011-08-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many reliability engineers are gainfully employed in considerations of the physical nature of components and systems-bringing to bear theories and methodologies of physics, electronics, mechanics, material science, chemistry, and so on. But when a product has been designed and manufactured, its performance in terms of durability, strength, and life become a matter of test, measurement, and analysis. Statistical theories and methodologies provide a large number of analytical tools to assist the reliability engineer in studying the performance of products and the fruits of the physical considerations, even revealing further improvements that can be made in the physical properties. Hence, reliability is a multidisciplined field of endeavor. Statistical theories and methodologies allow estimation of important characteristics as well as levels of confidence or assurance (or lack thereof) with respect to the estimations. They also provide direction in actions necessary to improve estimates and confidence levels if results are too variable to render important decisions. Some derivations are contained in this text, but the approach here is meant to be more practical, in following each topic introduced and expanded with examples. On each topic covered, reasonably practical examples are used to illustrate and demonstrate the procedures introduced and discussed. For all of these examples either Excel files or Minitab files or both have been prepared (available from Quality Press). They can be readily accessed and opened directly in their respective software packages to permit the preparation of new files specifically for use by the reader. "This book provides a much-needed theoretical text to aid advanced reliability engineering data analysis. Applications using Excel and Minitab support a broad span of probability applications for reliability data analysts. I most strongly recommend this book for seasoned Six Sigma Black Belts or statisticians who must support Design for Six Sigma applications for new product development projects. It's rich in food for thought as well as providing a most nourishing banquet for consumption by engineers --- it is not for light reading as a snack, but it must be consumed as a seven-course meal!" Gregory H. Watson Chairman, International Academy for Quality ASQ Past-President and Fellow

Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Download or read book Frontiers of Manufacturing and Design Science written by Ran Chen and published by Trans Tech Publications Ltd. This book was released on 2010-12-06 with total page 4286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2010 International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2010), Chonqqing, China, December 11-12, 2010

Download or read book Data Driven Remaining Useful Life Prognosis Techniques written by Xiao-Sheng Si and published by Springer. This book was released on 2017-01-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces data-driven remaining useful life prognosis techniques, and shows how to utilize the condition monitoring data to predict the remaining useful life of stochastic degrading systems and to schedule maintenance and logistics plans. It is also the first book that describes the basic data-driven remaining useful life prognosis theory systematically and in detail. The emphasis of the book is on the stochastic models, methods and applications employed in remaining useful life prognosis. It includes a wealth of degradation monitoring experiment data, practical prognosis methods for remaining useful life in various cases, and a series of applications incorporated into prognostic information in decision-making, such as maintenance-related decisions and ordering spare parts. It also highlights the latest advances in data-driven remaining useful life prognosis techniques, especially in the contexts of adaptive prognosis for linear stochastic degrading systems, nonlinear degradation modeling based prognosis, residual storage life prognosis, and prognostic information-based decision-making.

Download or read book Introduction to Statistics in Metrology written by Stephen Crowder and published by Springer Nature. This book was released on 2020-11-30 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the application of statistical methods to problems in metrology, with emphasis on modelling measurement processes and quantifying their associated uncertainties. It covers everything from fundamentals to more advanced special topics, each illustrated with case studies from the authors' work in the Nuclear Security Enterprise (NSE). The material provides readers with a solid understanding of how to apply the techniques to metrology studies in a wide variety of contexts. The volume offers particular attention to uncertainty in decision making, design of experiments (DOEx) and curve fitting, along with special topics such as statistical process control (SPC), assessment of binary measurement systems, and new results on sample size selection in metrology studies. The methodologies presented are supported with R script when appropriate, and the code has been made available for readers to use in their own applications. Designed to promote collaboration between statistics and metrology, this book will be of use to practitioners of metrology as well as students and researchers in statistics and engineering disciplines.