Download or read book 2007 Second IEEE Conference on Industrial Electronics and Applications written by I E E E * Standards and published by IEEE. This book was released on 2007-01-01 with total page 2918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICIEA 2007 written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of First International Conference on Information and Communication Technology for Intelligent Systems Volume 1 written by Suresh Chandra Satapathy and published by Springer. This book was released on 2016-06-30 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 59 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT for Computation, Algorithms and Data Analytics etc.

Download or read book Emerging Electric Machines written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the concepts and developments of emerging electric machines, including advances, perspectives, and selected applications. It is a helpful tool for practicing engineers concerned with emerging electric machines and their challenges and potential uses. Chapters cover such topics as electric machines with axial magnetic flux, asynchronous machines with dual power supply, new designs for electrical machines, and more.

Download or read book Advances in Power Electronics and Instrumentation Engineering written by Vinu V Das and published by Springer Science & Business Media. This book was released on 2011-04-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Conference on Advances in Power Electronics and Instrumentation Engineering, PEIE 2011, held at Nagpur, India, in April 2011. The 9 revised full papers presented together with 4 short papers and 7 poster papers were carefully reviewed and selected from numerous submissions. The papers address current issues in the field of power electronics, communication engineering, instrumentation engineering, digital electronics, electrical power engineering, electrical machines, information technology, control systems, and the like.

Download or read book Handbook of Research on Industrial Informatics and Manufacturing Intelligence Innovations and Solutions written by Khan, Mohammad Ayoub and published by IGI Global. This book was released on 2012-03-31 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is the best source for the most current, relevant, cutting edge research in the field of industrial informatics focusing on different methodologies of information technologies to enhance industrial fabrication, intelligence, and manufacturing processes"--Provided by publisher.

Download or read book Advanced Intelligent Computing Theories and Applications With Aspects of Theoretical and Methodological Issues written by De-Shuang Huang and published by Springer. This book was released on 2008-09-08 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Intelligent Computing (ICIC) was formed to p- vide an annual forum dedicated to the emerging and challenging topics in artificial intelligence, machine learning, bioinformatics, and computational biology, etc. It aims to bring together researchers and practitioners from both academia and ind- try to share ideas, problems and solutions related to the multifaceted aspects of intelligent computing. ICIC 2008, held in Shanghai, China, September 15–18, 2008, constituted the 4th International Conference on Intelligent Computing. It built upon the success of ICIC 2007, ICIC 2006 and ICIC 2005 held in Qingdao, Kunming and Hefei, China, 2007, 2006 and 2005, respectively. This year, the conference concentrated mainly on the theories and methodologies as well as the emerging applications of intelligent computing. Its aim was to unify the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in advanced computational intelligence and bridges theoretical research with applications. Therefore, the theme for this conference was “Emerging Intelligent Computing Technology and Applications”. Papers focusing on this theme were solicited, addressing theories, methodologies, and applications in science and technology.

Download or read book Information and Automation written by Luo Qi and published by Springer Science & Business Media. This book was released on 2011-04-15 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Symposium on Information and Automation, ISIA 2010, held in Guangzhou, China, in November 2010. The 110 revised full papers presented were carefully reviewed and selected from numerous submissions. The symposium provides a forum for researchers, educators, engineers, and government officials to present and discuss their latest research results and exchange views on the future research directions in the general areas of Information and Automation.

Download or read book Fundamentals of Inertial Navigation Satellite based Positioning and their Integration written by Aboelmagd Noureldin and published by Springer Science & Business Media. This book was released on 2012-10-26 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Inertial Navigation, Satellite-based Positioning and their Integration is an introduction to the field of Integrated Navigation Systems. It serves as an excellent reference for working engineers as well as textbook for beginners and students new to the area. The book is easy to read and understand with minimum background knowledge. The authors explain the derivations in great detail. The intermediate steps are thoroughly explained so that a beginner can easily follow the material. The book shows a step-by-step implementation of navigation algorithms and provides all the necessary details. It provides detailed illustrations for an easy comprehension. The book also demonstrates real field experiments and in-vehicle road test results with professional discussions and analysis. This work is unique in discussing the different INS/GPS integration schemes in an easy to understand and straightforward way. Those schemes include loosely vs tightly coupled, open loop vs closed loop, and many more.

Download or read book Proceedings of the 12th International Conference on Computer Engineering and Networks written by Qi Liu and published by Springer Nature. This book was released on 2022-10-19 with total page 1506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding is a collection of the papers accepted by the CENet2022 – the 12th International Conference on Computer Engineering and Networks held on November 4-7, 2022 in Haikou, China. The topics focus but are not limited to Internet of Things and Smart Systems, Artificial Intelligence and Applications, Communication System Detection, Analysis and Application, and Medical Engineering and Information Systems. Each part can be used as an excellent reference by industry practitioners, university faculties, research fellows and undergraduates as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity.

Download or read book Control Engineering and Information Systems written by Zhijing Liu and published by CRC Press. This book was released on 2015-01-19 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Engineering and Information Systems contains the papers presented at the 2014 International Conference on Control Engineering and Information Systems (ICCEIS 2014, Yueyang, Hunan, China, 20-22 June 2014). All major aspects of the theory and applications of control engineering and information systems are addressed, including: Intelligent s

Download or read book Proceeding of International Conference on Intelligent Communication Control and Devices written by Rajesh Singh and published by Springer. This book was released on 2016-09-17 with total page 1117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality research papers presented at the first international conference, ICICCD 2016, organised by the Department of Electronics, Instrumentation and Control Engineering of University of Petroleum and Energy Studies, Dehradun on 2nd and 3rd April, 2016. The book is broadly divided into three sections: Intelligent Communication, Intelligent Control and Intelligent Devices. The areas covered under these sections are wireless communication and radio technologies, optical communication, communication hardware evolution, machine-to-machine communication networks, routing techniques, network analytics, network applications and services, satellite and space communications, technologies for e-communication, wireless Ad-Hoc and sensor networks, communications and information security, signal processing for communications, communication software, microwave informatics, robotics and automation, optimization techniques and algorithms, intelligent transport, mechatronics system, guidance and navigation, algorithms, linear/non-linear control, home automation, sensors, smart cities, control systems, high performance computing, cognition control, adaptive control, distributed control, prediction models, hybrid control system, control applications, power system, manufacturing, agriculture cyber physical system, network control system, genetic control based, wearable devices, nano devices, MEMS, bio-inspired computing, embedded and real-time software, VLSI and embedded systems, FPGA, digital system and logic design, image and video processing, machine vision, medical imaging, and reconfigurable computing systems.

Download or read book Energy Storage Systems and Power Conversion Electronics for E Transportation and Smart Grid written by Sergio Saponara and published by MDPI. This book was released on 2020-12-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint in book form of the Energies MDPI Journal Special Issue , entitled “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid”. The Special Issue was managed by two Guest Editors from Italy and Norway: Professor Sergio Saponara from the University of Pisa and Professor Lucian MIHET-POPA from Østfold University College, in close cooperation with the Editors from Energies. The papers published in this SI are related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification, and on the evolution from the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for the smart grid, as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at the levels of both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) are proposed. Research and technology transfer activities in energy storage systems, such as batteries and super/ultra-capacitors, are essential for the success of electric transportation, and to foster the use of renewable energy sources. Energy storage systems are the key technology to solve these issues, and to increase the adoption of renewable energy sources in the smart grid.

Download or read book Recent Progress in Data Engineering and Internet Technology written by Ford Lumban Gaol and published by Springer Science & Business Media. This book was released on 2012-03-31 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical. Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing. This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies, intelligent information systems, data engineering applications, internet security, internet data management, web search, data grids, cloud computing, web-based application, and other related topics.

Download or read book VLSI Microwave and Wireless Technologies written by Brijesh Mishra and published by Springer Nature. This book was released on 2022-09-03 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the International Conference on VLSI & Microwave and Wireless Technologies (ICVMWT-2021). The book includes peer-reviewed papers on the core technological developments in emerging fields like wireless communication, RF microwave/radar, VLSI, optical communication, etc. The book will serve as a valuable reference resource for academics and researchers across the globe.

Download or read book Impedance Source Power Electronic Converters written by Yushan Liu and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well as different industrial applications. Provides an overview of existing challenges, solutions and future trends. Supported by calculation examples, simulation models and results. Highly accessible, this is an invaluable resource for researchers, postgraduate/graduate students studying power electronics and its application in industry and renewable energy conversion as well as practising R&D engineers. Readers will be able to apply the presented material for the future design of the next generation of efficient power electronic converters/inverters.

Download or read book Design and comparison of two brushless DC drives for an electric propulsion system of solar power unmanned aerial vehicles written by Dong, Rong and published by Universitätsverlag der TU Berlin. This book was released on 2020-08-26 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrical propulsion system as the core component of solar-power Unmanned Aerial Vehicles (UAVs) for long duration flight requires high power density and stable drive technology. Brushless DC motors (BLDCM) with high power and torque density and control algorithms suitable for drive system are given preference for the application in UAVs. This dissertation is aimed at designing an improved BLDCM using only 4 interior magnet blocks to realize 8 poles compared to the conventional 8 magnet blocks structure. The performances of both BLDCM designs have been analytically determined and the motor models were verified through finite element software in ANSYS. Design and construction of the demonstrators of BLDCMs with the proposed and the conventional magnet structure have been carried out and a test bench for extensive performance comparison has been set up. Since the proposed magnet structure leads to a particularity of the magnetic circuit, the behavior of absolute and differential synchronous direct and quadrature inductances have been investigated by finite element model analysis and experiments. Efficiency maps were generated and thermal characteristics have been measured to gain a comprehensive understanding of the two motors. To reduce the uncertainty of sensor control for BLDCM, a high speed, good linearity analog isolation circuit to measure the voltages of 270 V DC voltage to realize sensorless control strategy has been designed. The circuit combines a PI controller with fast operational amplifiers with a built-in linearizing feedback photodiode loop of a linear optocoupler. A 3D stator model was built to analyse the mechanical resonance frequencies and possible excitation by the electromagnetic radial force leading to vibration and noise for the proposed and conventional rotor structure. Analytical calculation of natural mode frequencies has also been conducted to compare and validate the accuracy of FEM simulations and impact hammer testing experimental results. Das elektrische Antriebssystem als Kernkomponente von unbemannten Solarflugzeugen (UAVs, Unmanned Aerial Vehicles) für Langzeitflüge erfordert eine hohe Leistungsdichte und robuste Antriebstechnik. Bürstenlose Gleichstrommotoren (BLDCM) mit hoher Leistungs- und Drehmomentdichte sowie dafür angepasste Regelalgorithmen werden daher bevorzugt in UAVs eingesetzt. Diese Dissertation zielt darauf ab, einen verbesserten BLDCM mit nur 4 eingebetteten Magnetblöcken zu entwerfen, um 8 Pole zu realisieren im Vergleich zu der herkömmlichen Struktur mit 8 Magnetblöcken. Das Verhalten beider BLDCM-Designs wurde analytisch ermittelt und die Motormodelle mit Hilfe von Finite-Elemente-Software in ANSYS verifiziert. Design und Konstruktion der Prototypen mit der vorgeschlagenen und der herkömmlichen Magnetstruktur wurden durchgeführt und es wurde ein Prüfstand für einen umfassenden Leistungsvergleich aufgebaut. Da die vorgeschlagene Magnetstruktur zu einem Magnetkreis führt, bei dem die entgegengesetzten Pole keine Spiegelsymmetrie aufweisen, wurden die Längs- und Querinduktivität durch Finite-Elemente-Modellanalyse und Experimente absolut und differentiell untersucht. Weiterhin wurden Wirkungsgradkennfelder erstellt und das thermische Verhalten untersucht, um ein umfassendes Verständnis der beiden Motoren zu erhalten. Um das sensorbedingte Ausfallrisiko zu eliminieren, wurde eine schnelle analoge Isolationsschaltung mit hoher Linearität und Stabilität zur Messung der gepulsten Spannungen bei 270V Gleichspannung entwickelt, um eine sensorlose Steuerungsstrategie zu realisieren. Die Schaltung verwendet einen linearen Optokoppler mit integrierter Rückkopplungsfotodiode, sowie einen PI-Regler mit schnellen Operationsverstärkern im Rückkopplungspfad. Ein 3D-Statormodell wurde erstellt, um die mechanischen Resonanzfrequenzen und die mögliche Anregung durch die elektromagnetische Radialkraft zu analysieren, die zu Vibrationen und Geräuschen bei der vorgeschlagenen und herkömmlichen Rotorstruktur führt. Es wurde auch eine analytische Modalanalyse durchgeführt, um die Genauigkeit von FEM-Simulationen und experimentellen Ergebnissen mit dem Impulshammer zu vergleichen und zu validieren.