Download or read book An Introduction to Optoelectronic Sensors written by Giancarlo C. Righini and published by World Scientific. This book was released on 2009 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Preface -- Part I: Optoelectronic Sensors Technologies -- 1. Fiber and Integrated Optics Sensors: Fundamentals and Applications G. C. Righini, A. G. Mignani, I. Cacciari and M. Brenci -- 1. Introduction -- 2. Fiber and Integrated Optics: Fundamentals of Waveguiding -- 3. Waveguide Sensors: Basic Working Principle -- 4. Fiber Optic Sensors -- 5. Long-Period Optical Fiber Grating Sensors -- 6. Micro-structured Fiber Sensors -- 7. Integrated Optic Sensors -- 8. Conclusions -- References -- 2. Fiber Bragg Grating Sensors: Industrial Applications C. Ambrosino, A. Iadicicco, S. Campopiano, A. Cutolo, M. Giordano and A. Cusano -- 1. Introduction -- 2. Fiber Bragg Gratings History -- 3. Fiber Bragg Gratings as Sensors -- 4. Civil Applications -- 5. Aerospace Applications -- 6. Energy Applications -- 7. Oil and Gas Applications -- 8. Transport Applications -- 9. Underwater Applications -- 10. Perspective and Challenges -- References -- 3. Distributed Optical Fiber Sensors R. Bernini, A. Minardo and L. Zeni -- 1. Introduction -- 2. Linear Backscattering Systems -- 3. Non-Linear Backscattering Systems -- 4. Non-Linear Forward-Scattering Systems -- 5. Conclusions -- References -- 4. Lightwave Technologies for Interrogation Systems of Fiber Bragg Gratings Sensors D. Donisi, R. Beccherelli and A. d'Alessandro -- 1. Introduction -- 2. Operating Principle of the Fiber Bragg Grating Sensor -- 3. FBG Interrogation Techniques -- 4. An Integrated Tunable Filter using Composite Holographic Grating -- 5. POLICRYPS Filterbased FBG Sensors Interrogation -- 6. Conclusions -- Acknowledgments -- References -- 5. Surface Plasmon Resonance: Applications in Sensors and Biosensors R. Rella and M. G. Manera -- 1. Introduction -- 2. SPR Theory -- 3. Optical Sensors based on Surface Plasmon Resonance -- 4. Application of SPR in Chemical Sensors and Biosensors -- 5. SPR Instrumentation: From Traditional SPR Instrument to SPR Imaging -- 6. Future Capabilities -- References -- 6. Microresonators for Sensing Applications S. Berneschi, G. Nunzi Conti, S. Pelli and S. Soria -- 1. Introduction -- 2. Whispering Gallery Modes in a Microsphere -- 3. WGM Resonators: Applications in Sensing -- Acknowledgments -- References -- 7. Photonic Crystals: Towards a Novel Generation of Integrated Optical Devices for Chemical and Biological Detection A. Ricciardi, C. Ciminelli, M. Pisco, S. Campopiano, C. E. Campanella, E. Scivittaro, M. N. Armenise, A. Cutolo and A. Cusano -- 1. Introduction -- 2. Photonic Crystals 190; Fundamental Principles -- 3. Functional Photonic Band Gap Components and Devices -- 4. Photonic Crystals for Chemical and Biological Sensing -- 5. Photonic Crystal Fibers Sensors -- 6. Perspectives and Challenges -- References -- 8. Micromachining Technologies for Sensor Applications P. M. Sarro, A. Irace and P. J. French -- 1. Introduction -- 2. Bulk Micromachining -- 3. Surface Micromachining -- 4. Characterization of Thin Film Membranes -- 5. Conclusions and Outlook -- References -- 9. Spectroscopic Techniques for Sensors S. Pelli, A. Chiasera, M. Ferrari and G. C. Righini -- 1. Introduction -- 2. Absorption, Reflectance and Transmission Measurements -- 3. Luminescence Measurements -- 4. Raman and Brillouin Measurements -- 5. Conclusions -- References -- 10. Laser Doppler Vibrometry P. Castellini, G. M. Revel". -- OCLC.

Download or read book Member Guide written by Optical Society of America and published by . This book was released on 2007 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Solid State Lasers written by Mikhail Grishin and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Invention of the solid-state laser has initiated the beginning of the laser era. Performance of solid-state lasers improved amazingly during five decades. Nowadays, solid-state lasers remain one of the most rapidly developing branches of laser science and become an increasingly important tool for modern technology. This book represents a selection of chapters exhibiting various investigation directions in the field of solid-state lasers and the cutting edge of related applications. The materials are contributed by leading researchers and each chapter represents a comprehensive study reflecting advances in modern laser physics. Considered topics are intended to meet the needs of both specialists in laser system design and those who use laser techniques in fundamental science and applied research. This book is the result of efforts of experts from different countries. I would like to acknowledge the authors for their contribution to the book. I also wish to acknowledge Vedran Kordic for indispensable technical assistance in the book preparation and publishing.

Download or read book written by and published by . This book was released on 1996 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Ultrafast Optics written by Fei He and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-09-10 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: No detailed description available for "Advances in Ultrafast Optics".

Download or read book Crystal Optics Properties and Applications written by Ashim Kumar Bain and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the properties and applications of photo-elastic, acousto-optic, magneto-optic, electro-optic, and photorefractive materials This book deals with the basic physical properties and applications of photo-elastic, acousto-optic, magneto-optic, electro-optic, and photorefractive materials. It also provides up-to-date information on the design and applications of various optoelectronic devices based on these materials. The first chapter of Crystal Optics: Properties and Applications covers the basic concepts of crystal optics, such as index ellipsoid or optical indicatrix, crystal symmetry, wave surface, birefringence, and the polarization of light. Chapter 2 reviews the physical phenomena of crystal optics in isotropic and crystalline materials. It describes in detail research information on modern photoelastic materials and reviews the up-to-date photoelastic device applications. Chapter 3 develops the underlying theory of acousto-optics from first principles, formulating results suitable for subsequent calculations and design. The fourth chapter describes the basic principles of magneto-optic effects and mode of interaction with magnetic materials. The fifth chapter provides an understanding of the physical phenomenon of the linear and quadratic electro-optic effects in isotropic and crystalline materials. The last chapter collects many of the most important recent developments in photorefractive effects and materials, and pays special attention to recent scientific findings and advances on photorefractive materials and devices. -Features up to date information on the design and applications of various optoelectronic devices -Looks at the basic concepts of crystal optics, including the polarization of light, effects of reflection and transmission of polarization and light polarizing devices, and more -Pays special attention to design procedures for the entire range of acousto-optic devices and various applications of these devices -Provides research information on modern magneto-optic materials and reviews the up-to-date magneto-optic device applications?up to terahertz (THz) regime Crystal Optics: Properties and Applications is an excellent book for the scientific community working in the field, including researchers, lecturers, and advanced students.

Download or read book Mode locked Lasers Introduction To Ultrafast Semiconductor And Fiber Lasers written by Niloy K Dutta and published by World Scientific. This book was released on 2024-05-21 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book provides a comprehensive treatment of the design and application of Mode Locked Lasers and Short Pulse Generation. With the advances in semiconductor laser and fiber laser technologies in the 1980s to now, these devices have been made compact, refined, and developed for a wide range of applications including further scientific studies.Semiconductor mode-locked lasers are stable pulse sources and can be made over a range of wavelengths where laser operation is feasible. Rare earth doped fiber lasers or planar waveguides extend this range further and can provide compact pulsed sources. The principles of operation, analysis, design and fabrication of these sources are described. Recent results on high repetition rate and high-power pulse generation from these compacts sources are also described, together with current and future directions of application of these types of laser sources.Mode-Locked Lasers: Introduction to Ultrafast Semiconductor and Fiber Lasers is self-contained and unified in presentation. It can be used as an advanced text by graduate students and by practicing engineers. It is also suitable for non-experts who wish to have an overview of mode-locked lasers and pulse generation. The explanations in the book are detailed enough to capture the interest of the curious reader and complete enough to provide the necessary background to explore the subject further.

Download or read book Frontiers in Guided Wave Optics and Optoelectronics written by Bishnu Pal and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the editor, I feel extremely happy to present to the readers such a rich collection of chapters authored/co-authored by a large number of experts from around the world covering the broad field of guided wave optics and optoelectronics. Most of the chapters are state-of-the-art on respective topics or areas that are emerging. Several authors narrated technological challenges in a lucid manner, which was possible because of individual expertise of the authors in their own subject specialties. I have no doubt that this book will be useful to graduate students, teachers, researchers, and practicing engineers and technologists and that they would love to have it on their book shelves for ready reference at any time.

Download or read book Applications in Electronics Pervading Industry Environment and Society written by Sergio Saponara and published by Springer Nature. This book was released on 2021-01-25 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. It covers a broad spectrum of application domains, from automotive to space and from health to security, while devoting special attention to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2020 ApplePies Conference, held online in November 2020, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas addressed by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean and efficient energy; the environment; and smart, green and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and the development of systems that facilitate human activities. This book, written by industrial and academic professionals, represents a valuable contribution in this endeavor.

Download or read book Advanced VLSI Design and Testability Issues written by Suman Lata Tripathi and published by CRC Press. This book was released on 2020-08-18 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book facilitates the VLSI-interested individuals with not only in-depth knowledge, but also the broad aspects of it by explaining its applications in different fields, including image processing and biomedical. The deep understanding of basic concepts gives you the power to develop a new application aspect, which is very well taken care of in this book by using simple language in explaining the concepts. In the VLSI world, the importance of hardware description languages cannot be ignored, as the designing of such dense and complex circuits is not possible without them. Both Verilog and VHDL languages are used here for designing. The current needs of high-performance integrated circuits (ICs) including low power devices and new emerging materials, which can play a very important role in achieving new functionalities, are the most interesting part of the book. The testing of VLSI circuits becomes more crucial than the designing of the circuits in this nanometer technology era. The role of fault simulation algorithms is very well explained, and its implementation using Verilog is the key aspect of this book. This book is well organized into 20 chapters. Chapter 1 emphasizes on uses of FPGA on various image processing and biomedical applications. Then, the descriptions enlighten the basic understanding of digital design from the perspective of HDL in Chapters 2–5. The performance enhancement with alternate material or geometry for silicon-based FET designs is focused in Chapters 6 and 7. Chapters 8 and 9 describe the study of bimolecular interactions with biosensing FETs. Chapters 10–13 deal with advanced FET structures available in various shapes, materials such as nanowire, HFET, and their comparison in terms of device performance metrics calculation. Chapters 14–18 describe different application-specific VLSI design techniques and challenges for analog and digital circuit designs. Chapter 19 explains the VLSI testability issues with the description of simulation and its categorization into logic and fault simulation for test pattern generation using Verilog HDL. Chapter 20 deals with a secured VLSI design with hardware obfuscation by hiding the IC’s structure and function, which makes it much more difficult to reverse engineer.

Download or read book Design and Realization of Novel GaAs Based Laser Concepts written by Tim David Germann and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor heterostructures represent the backbone for an increasing variety of electronic and photonic devices, for applications including information storage, communication and material treatment, to name but a few. Novel structural and material concepts are needed in order to further push the performance limits of present devices and to open up new application areas. This thesis demonstrates how key performance characteristics of three completely different types of semiconductor lasers can be tailored using clever nanostructure design and epitaxial growth techniques. All aspects of laser fabrication are discussed, from design and growth of nanostructures using metal-organic vapor-phase epitaxy, to fabrication and characterization of complete devices.

Download or read book Guided Wave Photonics written by Le Nguyen Binh and published by CRC Press. This book was released on 2016-04-19 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive presentation of the theory and simulation of optical waveguides and wave propagations in a guided environment, Guided Wave Photonics: Fundamentals and Applications with MATLAB supplies fundamental and advanced understanding of integrated optical devices that are currently employed in modern optical fiber communications systems and p

Download or read book Practical Applications of Microresonators in Optics and Photonics written by Andrey B. Matsko and published by CRC Press. This book was released on 2018-09-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembling an international team of experts, this book reports on the progress in the rapidly growing field of monolithic micro- and nanoresonators. The book opens with a chapter on photonic crystal-based resonators (nanocavities). It goes on to describe resonators in which the closed trajectories of light are supported by any variety of total internal reflection in curved and polygonal transparent dielectric structures. The book also covers distributed feedback microresonators for slow light, controllable dispersion, and enhanced nonlinearity. A portion of coverage is dedicated to the unique properties of resonators, which are extremely efficient tools when conducting multiple applications.

Download or read book Single Photon Generation and Detection written by and published by Academic Press. This book was released on 2013-11-29 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-photon generation and detection is at the forefront of modern optical physics research. This book is intended to provide a comprehensive overview of the current status of single-photon techniques and research methods in the spectral region from the visible to the infrared. The use of single photons, produced on demand with well-defined quantum properties, offers an unprecedented set of capabilities that are central to the new area of quantum information and are of revolutionary importance in areas that range from the traditional, such as high sensitivity detection for astronomy, remote sensing, and medical diagnostics, to the exotic, such as secretive surveillance and very long communication links for data transmission on interplanetary missions. The goal of this volume is to provide researchers with a comprehensive overview of the technology and techniques that are available to enable them to better design an experimental plan for its intended purpose. The book will be broken into chapters focused specifically on the development and capabilities of the available detectors and sources to allow a comparative understanding to be developed by the reader along with and idea of how the field is progressing and what can be expected in the near future. Along with this technology, we will include chapters devoted to the applications of this technology, which is in fact much of the driver for its development. This is set to become the go-to reference for this field. - Covers all the basic aspects needed to perform single-photon experiments and serves as the first reference to any newcomer who would like to produce an experimental design that incorporates the latest techniques - Provides a comprehensive overview of the current status of single-photon techniques and research methods in the spectral region from the visible to the infrared, thus giving broad background that should enable newcomers to the field to make rapid progress in gaining proficiency - Written by leading experts in the field, among which, the leading Editor is recognized as having laid down the roadmap, thus providing the reader with an authenticated and reliable source

Download or read book 1 Dimensional Metal Oxide Nanostructures written by Zainovia Lockman and published by CRC Press. This book was released on 2018-12-07 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1-D metal oxide nanostructures, especially those with semiconducting properties, have attracted much attention in recent years due to their potential and emerging applications, specifically in environment purification and energy devices. For these applications, there have been many efforts to grow 1-D nanostructures in the form of nanotubes, nanorods, and nanowires using processes that conserve energy, are cost effective, and can be scaled up for large-scale production. 1-Dimensional Metal Oxide Nanostructures gathers under one title the most recent development of oxide nanomaterials, especially those fabricated via oxidation process in the nanoscale field. Thermal and anodic oxidation processes are reviewed with an aim to offer an in-depth understanding of mechanisms of 1-D nanostructure formation, their characteristics, and limitations. Other more common methods are also discussed, including sol-gel, hydrothermal, and other templated methods. Important applications of 1-D nanostructures are then presented, focusing on oxides like zinc oxide, titanium oxide, zirconium oxide, copper oxide, and iron oxide. A chapter on carbon nanotubes hybrid with these oxides is also included as well as one on silicon oxide nanowires formation by local anodic oxidation process. Aimed at researchers, academics, and engineers working across the fields of nanotechnology, materials science, chemistry, physics, semiconductors, and environmental and biomedical engineering, this essential reference enables readers to grasp the main concepts of nanomaterials in 1-D: formation technique, characteristics, and uses. It also encourages practical innovations in nanotechnology, especially in curbing pressing global issues related to energy, environment, and security.

Download or read book Micromachining Techniques for Fabrication of Micro and Nano Structures written by Mojtaba Kahrizi and published by BoD – Books on Demand. This book was released on 2012-02-03 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromachining is used to fabricate three-dimensional microstructures and it is the foundation of a technology called Micro-Electro-Mechanical-Systems (MEMS). Bulk micromachining and surface micromachining are two major categories (among others) in this field. This book presents advances in micromachining technology. For this, we have gathered review articles related to various techniques and methods of micro/nano fabrications, like focused ion beams, laser ablation, and several other specialized techniques, from esteemed researchers and scientists around the world. Each chapter gives a complete description of a specific micromachining method, design, associate analytical works, experimental set-up, and the final fabricated devices, followed by many references related to this field of research available in other literature. Due to the multidisciplinary nature of this technology, the collection of articles presented here can be used by scientists and researchers in the disciplines of engineering, materials sciences, physics, and chemistry.

Download or read book Advanced Optical Wireless Communication Systems written by Shlomi Arnon and published by Cambridge University Press. This book was released on 2012-05-24 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines theory with real-world case studies to give a comprehensive overview of modern optical wireless technology.