Download or read book International Integrated Reliability Workshop Final Report written by and published by . This book was released on 2005 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-02-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.
Download or read book Reliability Prediction for Microelectronics written by Joseph B. Bernstein and published by John Wiley & Sons. This book was released on 2024-02-20 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: RELIABILITY PREDICTION FOR MICROELECTRONICS Wiley Series in Quality & Reliability Engineering REVOLUTIONIZE YOUR APPROACH TO RELIABILITY ASSESSMENT WITH THIS GROUNDBREAKING BOOK Reliability evaluation is a critical aspect of engineering, without which safe performance within desired parameters over the lifespan of machines cannot be guaranteed. With microelectronics in particular, the challenges to evaluating reliability are considerable, and statistical methods for creating microelectronic reliability standards are complex. With nano-scale microelectronic devices increasingly prominent in modern life, it has never been more important to understand the tools available to evaluate reliability. Reliability Prediction for Microelectronics meets this need with a cluster of tools built around principles of reliability physics and the concept of remaining useful life (RUL). It takes as its core subject the ‘physics of failure’, combining a thorough understanding of conventional approaches to reliability evaluation with a keen knowledge of their blind spots. It equips engineers and researchers with the capacity to overcome decades of errant reliability physics and place their work on a sound engineering footing. Reliability Prediction for Microelectronics readers will also find: Focus on the tools required to perform reliability assessments in real operating conditions Detailed discussion of topics including failure foundation, reliability testing, acceleration factor calculation, and more New multi-physics of failure on DSM technologies, including TDDB, EM, HCI, and BTI Reliability Prediction for Microelectronics is ideal for reliability and quality engineers, design engineers, and advanced engineering students looking to understand this crucial area of product design and testing.
Download or read book Component Reliability for Electronic Systems written by Titu I. Băjenescu and published by Artech House. This book was released on 2010 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main reason for the premature breakdown of today's electronic products (computers, cars, tools, appliances, etc.) is the failure of the components used to build these products. Today professionals are looking for effective ways to minimize the degradation of electronic components to help ensure longer-lasting, more technically sound products and systems. This practical book offers engineers specific guidance on how to design more reliable components and build more reliable electronic systems. Professionals learn how to optimize a virtual component prototype, accurately monitor product reliability during the entire production process, and add the burn-in and selection procedures that are the most appropriate for the intended applications. Moreover, the book helps system designers ensure that all components are correctly applied, margins are adequate, wear-out failure modes are prevented during the expected duration of life, and system interfaces cannot lead to failure.
Download or read book Defects in Microelectronic Materials and Devices written by Daniel M. Fleetwood and published by CRC Press. This book was released on 2008-11-19 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncover the Defects that Compromise Performance and ReliabilityAs microelectronics features and devices become smaller and more complex, it is critical that engineers and technologists completely understand how components can be damaged during the increasingly complicated fabrication processes required to produce them.A comprehensive survey of defe
Download or read book Circuit Design for Reliability written by Ricardo Reis and published by Springer. This book was released on 2014-11-08 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents physical understanding, modeling and simulation, on-chip characterization, layout solutions, and design techniques that are effective to enhance the reliability of various circuit units. The authors provide readers with techniques for state of the art and future technologies, ranging from technology modeling, fault detection and analysis, circuit hardening, and reliability management.
Download or read book Terrestrial Radiation Effects in ULSI Devices and Electronic Systems written by Eishi H. Ibe and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with knowledge on a wide variety of radiation fields and their effects on the electronic devices and systems. The author covers faults and failures in ULSI devices induced by a wide variety of radiation fields, including electrons, alpha-rays, muons, gamma rays, neutrons and heavy ions. Readers will learn how to make numerical models from physical insights, to determine the kind of mathematical approaches that should be implemented to analyze radiation effects. A wide variety of prediction, detection, characterization and mitigation techniques against soft-errors are reviewed and discussed. The author shows how to model sophisticated radiation effects in condensed matter in order to quantify and control them, and explains how electronic systems including servers and routers are shut down due to environmental radiation. Provides an understanding of how electronic systems are shut down due to environmental radiation by constructing physical models and numerical algorithms Covers both terrestrial and avionic-level conditions Logically presented with each chapter explaining the background physics to the topic followed by various modelling techniques, and chapter summary Written by a widely-recognized authority in soft-errors in electronic devices Code samples available for download from the Companion Website This book is targeted at researchers and graduate students in nuclear and space radiation, semiconductor physics and electron devices, as well as other areas of applied physics modelling. Researchers and students interested in how a variety of physical phenomena can be modelled and numerically treated will also find this book to present helpful methods.
Download or read book Sustainable ICTs and Management Systems for Green Computing written by Hu, Wen-Chen and published by IGI Global. This book was released on 2012-06-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book focuses on information technology using sustainable green computing to reduce energy and resources used"--Provided by publisher.
Download or read book ESD written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2015-01-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and in-depth review of analog circuit layout, schematic architecture, device, power network and ESD design This book will provide a balanced overview of analog circuit design layout, analog circuit schematic development, architecture of chips, and ESD design. It will start at an introductory level and will bring the reader right up to the state-of-the-art. Two critical design aspects for analog and power integrated circuits are combined. The first design aspect covers analog circuit design techniques to achieve the desired circuit performance. The second and main aspect presents the additional challenges associated with the design of adequate and effective ESD protection elements and schemes. A comprehensive list of practical application examples is used to demonstrate the successful combination of both techniques and any potential design trade-offs. Chapter One looks at analog design discipline, including layout and analog matching and analog layout design practices. Chapter Two discusses analog design with circuits, examining: single transistor amplifiers; multi-transistor amplifiers; active loads and more. The third chapter covers analog design layout (also MOSFET layout), before Chapters Four and Five discuss analog design synthesis. The next chapters introduce the reader to analog-digital mixed signal design synthesis, analog signal pin ESD networks, and analog ESD power clamps. Chapter Nine, the last chapter, covers ESD design in analog applications. Clearly describes analog design fundamentals (circuit fundamentals) as well as outlining the various ESD implications Covers a large breadth of subjects and technologies, such as CMOS, LDMOS, BCD, SOI, and thick body SOI Establishes an “ESD analog design” discipline that distinguishes itself from the alternative ESD digital design focus Focuses on circuit and circuit design applications Assessible, with the artwork and tutorial style of the ESD book series PowerPoint slides are available for university faculty members Even in the world of digital circuits, analog and power circuits are two very important but under-addressed topics, especially from the ESD aspect. Dr. Voldman’s new book will serve as an essential and practical guide to the greater IC community. With high practical and academic values this book is a “bible” for professionals, graduate students, device and circuit designers for investigating the physics of ESD and for product designs and testing.
Download or read book Electromigration in Thin Films and Electronic Devices written by Choong-Un Kim and published by Elsevier. This book was released on 2011-08-28 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and limiting electromigration in thin films is essential to the continued development of advanced copper interconnects for integrated circuits. Electromigration in thin films and electronic devices provides an up-to-date review of key topics in this commercially important area.Part one consists of three introductory chapters, covering modelling of electromigration phenomena, modelling electromigration using the peridynamics approach and simulation and x-ray microbeam studies of electromigration. Part two deals with electromigration issues in copper interconnects, including x-ray microbeam analysis, voiding, microstructural evolution and electromigration failure. Finally, part three covers electromigration in solder, with chapters discussing topics such as electromigration-induced microstructural evolution and electromigration in flip-chip solder joints.With its distinguished editor and international team of contributors, Electromigration in thin films and electronic devices is an essential reference for materials scientists and engineers in the microelectronics, packaging and interconnects industries, as well as all those with an academic research interest in the field. - Provides up-to-date coverage of the continued development of advanced copper interconnects for integrated circuits - Comprehensively reviews modelling of electromigration phenomena, modelling electromigration using the peridynamics approach and simulation, and x-ray microbeam studies of electromigration - Deals with electromigration issues in copper interconnects, including x-ray microbeam analysis, voiding, microstructural evolution and electromigration failure
Download or read book Prognostics and Remaining Useful Life RUL Estimation written by Diego Galar and published by CRC Press. This book was released on 2021-12-27 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance combines various methods, tools, and techniques in a bid to reduce maintenance costs while increasing the reliability, availability, and security of equipment. Condition-based maintenance (CBM) is one such method, and prognostics forms a key element of a CBM program based on mathematical models for predicting remaining useful life (RUL). Prognostics and Remaining Useful Life (RUL) Estimation: Predicting with Confidence compares the techniques and models used to estimate the RUL of different assets, including a review of the relevant literature on prognostic techniques and their use in the industrial field. This book describes different approaches and prognosis methods for different assets backed up by appropriate case studies. FEATURES Presents a compendium of RUL estimation methods and technologies used in predictive maintenance Describes different approaches and prognosis methods for different assets Includes a comprehensive compilation of methods from model-based and data-driven to hybrid Discusses the benchmarking of RUL estimation methods according to accuracy and uncertainty, depending on the target application, the type of asset, and the forecast performance expected Contains a toolset of methods and a way of deployment aimed at a versatile audience This book is aimed at professionals, senior undergraduates, and graduate students in all interdisciplinary engineering streams that focus on prognosis and maintenance.
Download or read book VLSI Design and Test for Systems Dependability written by Shojiro Asai and published by Springer. This book was released on 2018-07-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the new roles that the VLSI (very-large-scale integration of semiconductor circuits) is taking for the safe, secure, and dependable design and operation of electronic systems. The book consists of three parts. Part I, as a general introduction to this vital topic, describes how electronic systems are designed and tested with particular emphasis on dependability engineering, where the simultaneous assessment of the detrimental outcome of failures and cost of their containment is made. This section also describes the related research project “Dependable VLSI Systems,” in which the editor and authors of the book were involved for 8 years. Part II addresses various threats to the dependability of VLSIs as key systems components, including time-dependent degradations, variations in device characteristics, ionizing radiation, electromagnetic interference, design errors, and tampering, with discussion of technologies to counter those threats. Part III elaborates on the design and test technologies for dependability in such applications as control of robots and vehicles, data processing, and storage in a cloud environment and heterogeneous wireless telecommunications. This book is intended to be used as a reference for engineers who work on the design and testing of VLSI systems with particular attention to dependability. It can be used as a textbook in graduate courses as well. Readers interested in dependable systems from social and industrial–economic perspectives will also benefit from the discussions in this book.
Download or read book Soft Errors written by Jean-Luc Autran and published by CRC Press. This book was released on 2017-12-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft errors are a multifaceted issue at the crossroads of applied physics and engineering sciences. Soft errors are by nature multiscale and multiphysics problems that combine not only nuclear and semiconductor physics, material sciences, circuit design, and chip architecture and operation, but also cosmic-ray physics, natural radioactivity issues, particle detection, and related instrumentation. Soft Errors: From Particles to Circuits addresses the problem of soft errors in digital integrated circuits subjected to the terrestrial natural radiation environment—one of the most important primary limits for modern digital electronic reliability. Covering the fundamentals of soft errors as well as engineering considerations and technological aspects, this robust text: Discusses the basics of the natural radiation environment, particle interactions with matter, and soft-error mechanisms Details instrumentation developments in the fields of environment characterization, particle detection, and real-time and accelerated tests Describes the latest computational developments, modeling, and simulation strategies for the soft error-rate estimation in digital circuits Explores trends for future technological nodes and emerging devices Soft Errors: From Particles to Circuits presents the state of the art of this complex subject, providing comprehensive knowledge of the complete chain of the physics of soft errors. The book makes an ideal text for introductory graduate-level courses, offers academic researchers a specialized overview, and serves as a practical guide for semiconductor industry engineers or application engineers.
Download or read book Electromigration in Metals written by Paul S. Ho and published by Cambridge University Press. This book was released on 2022-05-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to assess electromigration reliability and design more resilient chips in this comprehensive and practical resource. Beginning with fundamental physics and building to advanced methodologies, this book enables the reader to develop highly reliable on-chip wiring stacks and power grids. Through a detailed review on the role of microstructure, interfaces and processing on electromigration reliability, as well as characterisation, testing and analysis, the book follows the development of on-chip interconnects from microscale to nanoscale. Practical modeling methodologies for statistical analysis, from simple 1D approximation to complex 3D description, can be used for step-by-step development of reliable on-chip wiring stacks and industrial-grade power/ground grids. This is an ideal resource for materials scientists and reliability and chip design engineers.
Download or read book Bias Temperature Instability for Devices and Circuits written by Tibor Grasser and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference to one of the more challenging reliability issues plaguing modern semiconductor technologies, negative bias temperature instability. Readers will benefit from state-of-the art coverage of research in topics such as time dependent defect spectroscopy, anomalous defect behavior, stochastic modeling with additional metastable states, multiphonon theory, compact modeling with RC ladders and implications on device reliability and lifetime.
Download or read book Carbon Nanotubes for Next Generation Electrical and Electronic Components written by Dr. R. Femi and published by Ashok Yakkaldevi. This book was released on 2023-04-08 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and Electronics Components using Copper (Cu) and Aluminium (Al) as a conducting material for many decades. This work presents the use of Carbon Nano Tubes (CNT) material to replace the traditional electrical and electronics conductive material. Also this work extensively reviewed the use of CNTs for the applications such as transformers, inductors, cables, connectors and motors which can considerably reduce the size and weight of the electrical components. Also, CNTs can be used as a electrical interconnect and bond wire material in electronics semiconductor devices. CNTs are promising conductive material for next generation electrical and electronics devices
Download or read book Variation Aware Adaptive Voltage Scaling for Digital CMOS Circuits written by Martin Wirnshofer and published by Springer Science & Business Media. This book was released on 2013-02-15 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing performance demands in integrated circuits, together with limited energy budgets, force IC designers to find new ways of saving power. One innovative way is the presented adaptive voltage scaling scheme, which tunes the supply voltage according to the present process, voltage and temperature variations as well as aging. The voltage is adapted “on the fly” by means of in-situ delay monitors to exploit unused timing margin, produced by state-of-the-art worst-case designs. This book discusses the design of the enhanced in-situ delay monitors and the implementation of the complete control-loop comprising the monitors, a control-logic and an on-chip voltage regulator. An analytical Markov-based model of the control-loop is derived to analyze its robustness and stability. Variation-Aware Adaptive Voltage Scaling for Digital CMOS Circuits provides an in-depth assessment of the proposed voltage scaling scheme when applied to an arithmetic and an image processing circuit. This book is written for engineers interested in adaptive techniques for low-power CMOS circuits.
