Download or read book VLSI Test Principles and Architectures written by Laung-Terng Wang and published by Elsevier. This book was released on 2006-08-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. - Most up-to-date coverage of design for testability. - Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. - Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.

Download or read book Integrated Circuit Test Engineering written by Ian A. Grout and published by Springer Science & Business Media. This book was released on 2005-12-08 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the book and the software provided with it, the reader can build his/her own tester arrangement to investigate key aspects of analog-, digital- and mixed system circuits Plan of attack based on traditional testing, circuit design and circuit manufacture allows the reader to appreciate a testing regime from the point of view of all the participating interests Worked examples based on theoretical bookwork, practical experimentation and simulation exercises teach the reader how to test circuits thoroughly and effectively

Download or read book Flexible Test Automation written by Pasquale Arpaia and published by Momentum Press. This book was released on 2014-12-31 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: In laboratory management of an industrial test division, a test laboratory, or a research center, one of the main activities is producing suitable software for automatic benches by satisfying a given set of requirements. This activity is particularly costly and burdensome when test requirements are variable over time. If the batches of objects have small size and frequent occurrence, the activity of measurement automation becomes predominating with respect to the test execution. Flexible Test Automation shows the development of a software framework as a useful solution to satisfy this exigency. The framework supports the user in producing measurement applications for a wide range of requirements with low effort and development time.

Download or read book Fault Diagnosis of Dynamic Systems written by Teresa Escobet and published by Springer. This book was released on 2019-06-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis of Dynamic Systems provides readers with a glimpse into the fundamental issues and techniques of fault diagnosis used by Automatic Control (FDI) and Artificial Intelligence (DX) research communities. The book reviews the standard techniques and approaches widely used in both communities. It also contains benchmark examples and case studies that demonstrate how the same problem can be solved using the presented approaches. The book also introduces advanced fault diagnosis approaches that are currently still being researched, including methods for non-linear, hybrid, discrete-event and software/business systems, as well as, an introduction to prognosis. Fault Diagnosis of Dynamic Systems is valuable source of information for researchers and engineers starting to work on fault diagnosis and willing to have a reference guide on the main concepts and standard approaches on fault diagnosis. Readers with experience on one of the two main communities will also find it useful to learn the fundamental concepts of the other community and the synergies between them. The book is also open to researchers or academics who are already familiar with the standard approaches, since they will find a collection of advanced approaches with more specific and advanced topics or with application to different domains. Finally, engineers and researchers looking for transferable fault diagnosis methods will also find useful insights in the book.

Download or read book Software Engineering and Computer Systems Part III written by Jasni Mohamad Zain and published by Springer Science & Business Media. This book was released on 2011-06-22 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Three-Volume-Set constitutes the refereed proceedings of the Second International Conference on Software Engineering and Computer Systems, ICSECS 2011, held in Kuantan, Malaysia, in June 2011. The 190 revised full papers presented together with invited papers in the three volumes were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on software engineering; network; bioinformatics and e-health; biometrics technologies; Web engineering; neural network; parallel and distributed; e-learning; ontology; image processing; information and data management; engineering; software security; graphics and multimedia; databases; algorithms; signal processing; software design/testing; e- technology; ad hoc networks; social networks; software process modeling; miscellaneous topics in software engineering and computer systems.

Download or read book Knowledge Driven Board Level Functional Fault Diagnosis written by Fangming Ye and published by Springer. This book was released on 2016-08-19 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive set of characterization, prediction, optimization, evaluation, and evolution techniques for a diagnosis system for fault isolation in large electronic systems. Readers with a background in electronics design or system engineering can use this book as a reference to derive insightful knowledge from data analysis and use this knowledge as guidance for designing reasoning-based diagnosis systems. Moreover, readers with a background in statistics or data analytics can use this book as a practical case study for adapting data mining and machine learning techniques to electronic system design and diagnosis. This book identifies the key challenges in reasoning-based, board-level diagnosis system design and presents the solutions and corresponding results that have emerged from leading-edge research in this domain. It covers topics ranging from highly accurate fault isolation, adaptive fault isolation, diagnosis-system robustness assessment, to system performance analysis and evaluation, knowledge discovery and knowledge transfer. With its emphasis on the above topics, the book provides an in-depth and broad view of reasoning-based fault diagnosis system design. • Explains and applies optimized techniques from the machine-learning domain to solve the fault diagnosis problem in the realm of electronic system design and manufacturing;• Demonstrates techniques based on industrial data and feedback from an actual manufacturing line;• Discusses practical problems, including diagnosis accuracy, diagnosis time cost, evaluation of diagnosis system, handling of missing syndromes in diagnosis, and need for fast diagnosis-system development.

Download or read book IEEE Autotestcon Proceedings written by and published by . This book was released on 1981 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Information Control Problems in Manufacturing 2006 written by Alexandre Dolgui and published by Elsevier. This book was released on 2011-10-10 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing

Download or read book Proceedings written by and published by . This book was released on 2004 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthetic Instruments Concepts and Applications written by Chris Nadovich and published by Elsevier. This book was released on 2004-09-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The way electronic instruments are built is changing in a deeply fundamental way. It is making an evolutionary leap to a new method of design that is being called synthetic instruments. This new method promises to be the most significant advance in electronic test and instrumentation since the introduction of automated test equipment (ATE). The switch to synthetic instruments is beginning now, and it will profoundly affect all test and measurement equipment that will be developed in the future. Synthetic instruments are like ordinary instruments in that they are specific to a particular measurement or test. They might be a voltmeter that measures voltage, or a spectrum analyzer that measures spectra. The key, defining difference is this: synthetic instruments are implemented purely in software that runs on general purpose, non-specific measurement hardware with a high speed A/D and D/A at its core. In a synthetic instrument, the software is specific; the hardware is generic. Therefore, the "personality" of a synthetic instrument can be changed in an instant. A voltmeter may be a spectrum analyzer a few seconds later, and then become a power meter, or network analyzer, or oscilloscope. Totally different instruments are implemented on the same hardware and can be switched back and forth in the blink of an eye. This book explains the basics of synthetic instrumentation for the many people that will need to quickly learn about this revolutionary way to design test equipment. This book attempts to demystify the topic, cutting through, commercial hype, and obscure, vague jargon, to get to the heart of the technique. It reveals the important basic underlying concepts, showing people how the synthetic instrument design approach, properly executed, is so effective in creating nstrumentation that out performs traditional approaches to T&M and ATE being used today. - provides an overview and complete introduction to this revolutionary new technology - enables equipment designers and manufacturers to produce vastly more functional and flexible instrumentation; it's not your father's multimeter!

Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2018-08-21 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable guide for engineers and data scientists in design, testing, operation, manufacturing, and maintenance A road map to the current challenges and available opportunities for the research and development of Prognostics and Health Management (PHM), this important work covers all areas of electronics and explains how to: assess methods for damage estimation of components and systems due to field loading conditions assess the cost and benefits of prognostic implementations develop novel methods for in situ monitoring of products and systems in actual life-cycle conditions enable condition-based (predictive) maintenance increase system availability through an extension of maintenance cycles and/or timely repair actions; obtain knowledge of load history for future design, qualification, and root cause analysis reduce the occurrence of no fault found (NFF) subtract life-cycle costs of equipment from reduction in inspection costs, downtime, and inventory Prognostics and Health Management of Electronics also explains how to understand statistical techniques and machine learning methods used for diagnostics and prognostics. Using this valuable resource, electrical engineers, data scientists, and design engineers will be able to fully grasp the synergy between IoT, machine learning, and risk assessment.

Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.

Download or read book Formal Approaches to Software Testing written by Alexandre Petrenko and published by Springer Science & Business Media. This book was released on 2004-01-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the Third International Workshop on Formal Approaches to Testing of Software, FATES 2003, held in Montreal, Quebec, Canada, on October 6th, 2003. The 18 revised full papers presented were carefully selected from 43 submissions during two rounds of reviewing and improvement. The papers are organized in topical sections on program testing and analysis, test theory and test derivation algorithms, and test methods and test tools.

Download or read book Remote Instrumentation and Virtual Laboratories written by Franco Davoli and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accessing remote instrumentation worldwide is one of the goals of e-Science. The task of enabling the execution of complex experiments that involve the use of distributed scientific instruments must be supported by a number of different architectural domains, which inter-work in a coordinated fashion to provide the necessary functionality. These domains embrace the physical instruments, the communication network interconnecting the distributed systems, the service oriented abstractions and their middleware. The Grid paradigm (or, more generally, the Service Oriented Architecture -- SOA), viewed as a tool for the integration of distributed resources, plays a significant role, not only to manage computational aspects, but increasingly as an aggregator of measurement instrumentation and pervasive large-scale data acquisition platforms. In this context, the functionality of a SOA allows managing, maintaining and exploiting heterogeneous instrumentation and acquisition devices in a unified way, by providing standardized interfaces and common working environments to their users, but the peculiar aspects of dealing with real instruments of widely different categories may add new functional requirements to this scenario. On the other hand, the growing transport capacity of core and access networks allows data transfer at unprecedented speed, but new challenges arise from wireless access, wireless sensor networks, and the traversal of heterogeneous network domains. The book focuses on all aspects related to the effective exploitation of remote instrumentation and to the building complex virtual laboratories on top of real devices and infrastructures. These include SOA and related middleware, high-speed networking in support of Grid applications, wireless Grids for acquisition devices and sensor networks, Quality of Service (QoS) provisioning for real-time control, measurement instrumentation and methodology, as well as metrology issues in distributed systems.

Download or read book Software Engineering for Self Adaptive Systems written by Rogério de Lemos and published by Springer. This book was released on 2013-01-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the self-adaptability of systems has been studied in a wide range of disciplines, from biology to robotics, only recently has the software engineering community recognized its key role in enabling the development of self-adaptive systems that are able to adapt to internal faults, changing requirements, and evolving environments. The 15 carefully reviewed papers included in this state-of-the-art survey were presented at the International Seminar on "Software Engineering for Self-Adaptive Systems", held in Dagstuhl Castle, Germany, in October 2010. Continuing the course of the first book of the series on "Software Engineering for Self-Adaptive Systems" the collection of papers in this second volume comprises a research roadmap accompanied by four elaborating working group papers. Next there are two parts - with three papers each - entitled "Requirements and Policies" and "Design Issues"; part four of the book contains four papers covering a wide range of "Applications".

Download or read book Structural Prognostics and Health Management in Power Energy Systems written by Dong Wang and published by MDPI. This book was released on 2019-11-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of preparing an Energies Special Issue on “Structural Prognostics and Health Management in Power & Energy Systems” is to compile information on the recent advances in structural prognostics and health management (SPHM). Continued improvements on SPHM have been made possible through advanced signature analysis, performance degradation assessment, as well as accurate modeling of failure mechanisms by introducing advanced mathematical approaches/tools. Through combining deterministic and probabilistic modeling techniques, research on SPHM can provide assurance for new structures at a design stage and ensure construction integrity at a fabrication phase. Specifically, power and energy system failures occur under multiple sources of uncertainty/variability resulting from load variations in usage, material properties, geometry variations within tolerances, and other uncontrolled variations. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on SPHM are desired and expected, which attempt to prevent overdesign and unnecessary inspection and provide tools to enable a balance between safety and economy to be achieved. This Special Issue has attracted submissions from China, USA, Portugal, and Italy. A total of 26 submissions were received and 11 articles finally published.

Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2008-05-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the third “International Conference on Informatics in Control Automation and Robotics” (ICINCO 2006), held in Setúbal, Portugal, from 1 to 5 August 2006, sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). The conference was organized in three simultaneous tracks: “Intelligent Control Systems and Optimization”, “Robotics and Automation” and “Systems Modeling, Signal Processing and Control”. The book is based on the same structure. Although ICINCO 2006 received 309 paper submissions, from more than 50 different countries in all continents, only 31 where accepted as full papers. From those, only 23 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers also reflect the interdisciplinary nature of the conference. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends. These high quality standards will be maintained and reinforced at ICINCO 2007, to be held in Angers, France, and in future editions of this conference.