Download or read book Scientific Information Bulletin written by and published by . This book was released on 1991 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered in Japan written by Jeffrey K. Liker and published by Oxford University Press, USA. This book was released on 1995 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered in Japan presents a unique and comprehensive examination of technology management in the most successful Japanese companies: unique in that all chapters go beyond superficial descriptions of stylized practices to look in depth at particular issues, often contradicting or qualifying the conventional wisdom; comprehensive in that it covers the entire technology life cycle from basic R&D, to development engineering, to manufacturing processes, to learning from the Japanese. Each chapter is based on original research by noted scholars in the field, and identifies technology management practices that have become a major source of competitive advantage for highly successful Japanese companies. Engineered in Japan documents the best practices from such companies as Toyota, Hitachi, Toshiba, and Nippondenso, and discusses how these technology management practices can be usefully adopted in other cultural contexts. Going beyond past observations, the authors all delve below the surface of Japanese management approaches. They look more closely than has been done before at how particular methods are applied, and they identify some new practices that have not yet been highlighted in books on Japanese methods. Presenting recent data that contradict some conventional thinking about U.S.-Japanese differences, they look at old techniques from a new perspective. "U.S. managers can perhaps learn more from the process of creation in Japan and the organizational structures that support innovation," say the editors in their introduction, "than from the particular approaches, tools, and technologies created." A running theme throughout the book is that Japanese managers and engineers tend to think in terms of systems, focusing not just on the parts but on the connections between them. Engineered in Japan is must reading for technology managers and engineers, along with anyone interested in Japanese business, engineering, and management.

Download or read book Proceedings of the IEEE International Symposium on Industrial Electronics written by and published by . This book was released on 1993 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vision based Vehicle Guidance written by Ichiro Masaki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing social interest in developing vision-based vehicle guidance systems for improving traffic safety and efficiency and the environment. Ex amples of vision-based vehicle guidance systems include collision warning systems, steering control systems for tracking painted lane marks, and speed control systems for preventing rear-end collisions. Like other guidance systems for aircraft and trains, these systems are ex pected to increase traffic safety significantly. For example, safety improve ments of aircraft landing processes after the introduction of automatic guidance systems have been reported to be 100 times better than prior to installment. Although the safety of human lives is beyond price, the cost for automatic guidance could be compensated by decreased insurance costs. It is becoming more important to increase traffic safety by decreasing the human driver's load in our society, especially with an increasing population of senior people who continue to drive. The second potential social benefit is the improvement of traffic efficiency by decreasing the spacing between vehicles without sacrificing safety. It is reported, for example, that four times the efficiency is expected if the spacing between cars is controlled automatically at 90 cm with a speed of 100 kmjh compared to today's typical manual driving. Although there are a lot of tech nical, psychological, and social issues to be solved before realizing the high density jhigh-speed traffic systems described here, highly efficient highways are becoming more important because of increasing traffic congestion.

Download or read book Intelligent Autonomous Systems IAS 3 written by F. C. A. Groen and published by IOS Press. This book was released on 1993 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers dealing with complete systems of intelligent robots, focusing on autonomy. The contributions cover intelligent perception, intelligent planning and control, and integrated systems.

Download or read book Adaptive Structures Tenth International Conference Proceedings written by Roger Ohayon and published by CRC Press. This book was released on 2000-03-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ant Colony Optimization and Swarm Intelligence written by Directeur de Recherches Du Fnrs Marco Dorigo and published by Springer Science & Business Media. This book was released on 2004-08-19 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Workshop on Ant Colony Optimization and Swarm Intelligence, ANTS 2004, held in Brussels, Belgium in September 2004. The 22 revised full papers, 19 revised short papers, and 9 poster abstracts presented were carefully reviewed and selected from 79 papers submitted. The papers are devoted to theoretical and foundational aspects of ant algorithms, ant colony optimization and swarm intelligence and deal with a broad variety of optimization applications in networking and operations research.

Download or read book Logical Aspects of Computational Linguistics written by Alain Lecomte and published by Springer Science & Business Media. This book was released on 1999-03-17 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the Second International Conference on Logical Aspects of Computational Linguistics, LACL '97, held in Nancy, France in September 1997. The 10 revised full papers presented were carefully selected during two rounds of reviewing. Also included are two comprehensive invited papers. Among the topics covered are type theory, various types of grammars, linear logic, parsing, type-directed natural language processing, proof-theoretic aspects, concatenation logics, and mathematical languages.

Download or read book Recent Advances in Robot Learning written by Judy A. Franklin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Robot Learning contains seven papers on robot learning written by leading researchers in the field. As the selection of papers illustrates, the field of robot learning is both active and diverse. A variety of machine learning methods, ranging from inductive logic programming to reinforcement learning, is being applied to many subproblems in robot perception and control, often with objectives as diverse as parameter calibration and concept formulation. While no unified robot learning framework has yet emerged to cover the variety of problems and approaches described in these papers and other publications, a clear set of shared issues underlies many robot learning problems. Machine learning, when applied to robotics, is situated: it is embedded into a real-world system that tightly integrates perception, decision making and execution. Since robot learning involves decision making, there is an inherent active learning issue. Robotic domains are usually complex, yet the expense of using actual robotic hardware often prohibits the collection of large amounts of training data. Most robotic systems are real-time systems. Decisions must be made within critical or practical time constraints. These characteristics present challenges and constraints to the learning system. Since these characteristics are shared by other important real-world application domains, robotics is a highly attractive area for research on machine learning. On the other hand, machine learning is also highly attractive to robotics. There is a great variety of open problems in robotics that defy a static, hand-coded solution. Recent Advances in Robot Learning is an edited volume of peer-reviewed original research comprising seven invited contributions by leading researchers. This research work has also been published as a special issue of Machine Learning (Volume 23, Numbers 2 and 3).

Download or read book Robotics Mechatronics and Manufacturing Systems written by T. Takamori and published by Elsevier. This book was released on 2012-12-02 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important problems in the field of engineering and technology is the development of so-called intelligent systems, which can perform various intellectual tasks. This book is dedicated to the current progress of research in this vast field and specifically explores the topics of robotics, mechatronics and manufacturing systems.

Download or read book Scientific Visualization of Physical Phenomena written by Nicholas M. Patrikalakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Visualization of Physical Phenomena reflects the special emphasis of the Computer Graphics Society's Ninth International Conference, held at the MIT in Cambridge, Massachusetts, USA in June, 1991. This volume contains the proceedings of the conference, which, since its foundation in 1983, continues to attract high quality research articles in all aspects of Computer Graphics and its applications. Visualization in science and engineering is rapidly developing into a vital area because of its potential for significantly contributing to the understanding of physical processes and the design automation of man-made systems. With the increasing emphasis in handling complicated physical and artificial processes and systems and with continuing advances in specialized graphics hardware and processing software and algorithms, visualization is expected to play an increasingly dominant role in the foreseeable future.

Download or read book Control in Robotics and Automation written by Bijoy K. Ghosh and published by Elsevier. This book was released on 1999-04-09 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputer technology and micromechanical design have contributed to recent rapid advances in Robotics. Particular advances have been made in sensor technology that allow robotic systems to gather data and react "intelligently" in flexible manufacturing systems. The analysis and recording of the data are vital to controlling the robot.In order to solve problems in control and planning for a Robotic system it is necessary to meet the growing need for the integration of sensors in to the system. Control in Robotics and Automation addresses this need. This book covers integration planning and control based on prior knowledge and real-time sensory information. A new task-oriented approach to sensing, planning and control introduces an event-based method for system design together with task planning and three dimensional modeling in the execution of remote operations.Typical remote systems are teleoperated and provide work efficiencies that are on the order of ten times slower than what is directly achievable by humans. Consequently, the effective integration of automation into teleoperated remote systems offers potential to improve remote system work efficiency. The authors introduce visually guided control systems and study the role of computer vision in autonomously guiding a robot system. - Sensor-Based Planning and Control in an Event-Based Approach - Visually Guided Sensing and Control - Multiple Sensor Fuson in Planning and Control - System Integration and Implementation - Practical Applications

Download or read book Nonlinear Dynamics and Stochastic Mechanics written by Wolfgang Kliemann and published by CRC Press. This book was released on 2018-05-04 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering systems have played a crucial role in stimulating many of the modern developments in nonlinear and stochastic dynamics. After 20 years of rapid progress in these areas, this book provides an overview of the current state of nonlinear modeling and analysis for mechanical and structural systems. This volume is a coherent compendium written by leading experts from the United States, Canada, Western and Eastern Europe, and Australia. The 22 articles describe the background, recent developments, applications, and future directions in bifurcation theory, chaos, perturbation methods, stochastic stability, stochastic flows, random vibrations, reliability, disordered systems, earthquake engineering, and numerics. The book gives readers a sophisticated toolbox that will allow them to tackle modeling problems in mechanical systems that use stochastic and nonlinear dynamics ideas. An extensive bibliography and index ensure this volume will remain a reference standard for years to come.

Download or read book Joint U S Japan Conference on Adaptive Structures written by and published by . This book was released on 1991 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Neural Networks for Identification Prediction and Control written by Duc T. Pham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there has been a growing interest in applying neural networks to dynamic systems identification (modelling), prediction and control. Neural networks are computing systems characterised by the ability to learn from examples rather than having to be programmed in a conventional sense. Their use enables the behaviour of complex systems to be modelled and predicted and accurate control to be achieved through training, without a priori information about the systems' structures or parameters. This book describes examples of applications of neural networks In modelling, prediction and control. The topics covered include identification of general linear and non-linear processes, forecasting of river levels, stock market prices and currency exchange rates, and control of a time-delayed plant and a two-joint robot. These applications employ the major types of neural networks and learning algorithms. The neural network types considered in detail are the muhilayer perceptron (MLP), the Elman and Jordan networks and the Group-Method-of-Data-Handling (GMDH) network. In addition, cerebellar-model-articulation-controller (CMAC) networks and neuromorphic fuzzy logic systems are also presented. The main learning algorithm adopted in the applications is the standard backpropagation (BP) algorithm. Widrow-Hoff learning, dynamic BP and evolutionary learning are also described.

Download or read book Automotive Sensory Systems written by C. Nwagboso and published by Springer Science & Business Media. This book was released on 1993-06-30 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly growing need for mobility has brought with it a major challenge for improvement in the operation and utilization of automotive systems. The economical, environmental and safety constraints imposed by the increase in the number of road vehicles and subsequent government policies also require substantial product development through the application of infor mation technology. This involves the enhancement of vehicle informatics and telematic systems with additional sensors and systems. The advance in the design and development of automotive sensory systems is so rapid that there is urgent need for the experts involved in the technology to work together to provide a reference book for the engineer of today and tomorrow. This motivated me to spend two years researching the topics and the basis on which such a book should be written. The result is the present compilation of the work of international experts on the state-of-the-art in the field of automotive sensory systems. Thus, a unique collection has been created for the reference of all those concerned with, or interested in, the design and development of modern, safe and intelligent vehicles. Although this book is intended for engineers, managers, scientists, academicians and policy makers, students should also find it valuable. To meet the requirements of students the basics are explained in simple terms; however, it is hoped that others will appreciate this approach, since most of us are well aware that gaps remain in our knowledge of the elements of our profession.

Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.