Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1989-10-10 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study shows the impact resistance of polypropylene toughened by an ethylene-propylene elastomer. The objective was to modify polystyrene with linear thermoplastic elastomer of styrene-isoprene-styrene triblock copolymer and polystyrene with ethylene-propylene rubber by weight by melt blending.
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book 1996 Polymers Laminations Coatings Conference written by Technical Association of the Pulp and Paper Industry and published by . This book was released on 1996 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments In Pressure Sensitive Products written by Istvan Benedek and published by CRC Press. This book was released on 2005-11-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first groundbreaking edition of Developments in Pressure-Sensitive Products was introduced in 1998, heavy research has resulted in substantial progress in the field. Fully updated and expanded to reflect this activity, Developments in Pressure-Sensitive Products, Second Edition provides a detailed overview of the entire range of pressure-
Download or read book Bibliographic Guide to Conference Publications written by New York Public Library. Research Libraries and published by . This book was released on 1987 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1975- include publications cataloged by the Research Libraries of the New York Public Library with additional entries from the Library of Congress MARC tapes.
Download or read book Development and Manufacture of Pressure Sensitive Products written by Istvan Benedek and published by CRC Press. This book was released on 1998-09-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Offers a detailed analysis of pressure-sensitive products (PSPs), covering both the scientific principles underlying their manufacture and a variety of applications in electronics, medicine, and packaging. Compares the manufacture of PSPs using plastics processing and adhesive coating techniques."
Download or read book Ullmann s Food and Feed 3 Volume Set written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of 58 carefully selected, topical articles from the Ullmann's Encyclopedia of Industrial Chemistry, this three-volume handbook provides a wealth of information on economically important basic foodstuffs, raw materials, additives, and processed foods, including a section on animal feed. It brings together the chemical and physical characteristics, production processes and production figures, main uses, toxicology and safety information in one single resource. More than 40 % of the content has been added or updated since publication of the 7th edition of the Encyclopedia in 2011 and is available here in print for the first time. The result is a "best of Ullmann's", bringing the vast knowledge to the desks of professionals in the food and feed industries.
Download or read book ANTEC 2001 written by Society of Plastics Engineers. Technical Conference and published by Taylor & Francis. This book was released on 2001 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Conference Proceedings Received written by British Library. Document Supply Centre and published by . This book was released on 1987 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Packaging Technology written by Debra K. Henyon and published by ASTM International. This book was released on 1991 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eight papers from a symposium in San Diego, November 1989, and an introductory overview discuss aspects of the food packaging industry, including extending the shelf life of products through computer modeling, the effect of the food on the package, flavor management, and techniques to evaluate packa
Download or read book Handbook of Biodegradable Polymers written by Catia Bastioli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-03-09 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers characteristics, processability and application areas of biodegradable polymers, with key polymer family groups discussed. It explores the role of biodegradable polymers in different waste management practices including anaerobic digestion, and considers topics such as the different types of biorefineries for renewable monomers used in producing the building blocks for biodegradable polymers.
Download or read book Handbook of Plastic Films written by Elsayed M. Abdel-Bary and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic films are high-performance materials which play an essential part in modern life. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. The understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films. Plastic films are high-performance materials which play an essential part in modern life. Plastic films are mostly used in packaging applications but as will be seen from this book they are also used in the agricultural, medical and engineering fields. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. The understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films.
Download or read book The Science and Technology of Flexible Packaging written by Barry A. Morris and published by William Andrew. This book was released on 2022-07-23 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Flexible Packaging: Multilayer Films from Resin and Process to End Use, Second Edition provides a comprehensive guide on plastic films in flexible packaging, covering scientific principles, materials properties, processes and end use considerations. Sections discuss the science of multilayer films in a concise and impactful way, presenting the fundamental understanding required to improve product design, material selection and processes. In addition, the book includes information on why one material is favored over another and how film or coating affects material properties. Descriptions and analysis of key properties of packaging films are provided from engineering and scientific perspectives. With essential scientific insights, best practice techniques, environmental sustainability information and key principles of structure design, this book provides information aids in material selection and processing, how to shorten development times and deliver stronger products, and ways to enable engineers and scientists to deliver superior products with reduced development time and cost. - Provides essential information on all aspects of multilayer films in flexible packaging, including processing, properties, materials and end use - Bridges the gap between scientific principles and practical challenges - Includes explanations to assist practitioners in overcoming challenges - Enables the reader to address new challenges, such as design for sustainability and eCommerce
Download or read book Handbook of Polymer Testing written by Roger Brown and published by CRC Press. This book was released on 1999-01-21 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Polymer Testing: Physical Methods provides virtually currently used techniques for measuring and testing the physical properties of polymers. A concise but detailed technical guide to the physical testing methods of synthetic polymers in plastics, rubbers, cellular materials, textiles, coated fabrics, and composites, the book analyses a wide array of physical parameters and features complete coverage of mechanical, optical, and electrical, and thermal properties. Topics of interest include sample preparation, time-dependent properties, coated fabrics, weathering, permeability, and nondestructive testing.
Download or read book Pressure Sensitive Design Theoretical Aspects written by Istvan Benedek and published by CRC Press. This book was released on 2006-03-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing interest in the formulation of pressure-sensitive adhesives as described in the first edition of this book ( Pressure-Sensitive Formulation, VSP, 2000) required a new, enlarged edition including the design of pressure-sensitive adhesives as a separate volume. Developments in the understanding of pressure sensitivity were necessary to use ma
Download or read book Pressure Sensitive Formulation written by Istvan Benedek and published by CRC Press. This book was released on 2020-06-07 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing interest in the formulation of pressure-sensitive adhesives as described in the first edition of this book ( Pressure-Sensitive Formulation, VSP, 2000) required a new, enlarged edition including the design of pressure-sensitive adhesives as a separate volume. Developments in the understanding of pressure sensitivity were necessary to use macromolecular chemistry for pressure-sensitive design. Such developments include polymer physics and contact mechanics. Progress in coating technology, especially in in-line coating- and synthesis, opened new ways for the design of pressure-sensitive adhesives and products as well. Actually, pressure-sensitive-products with and without adhesives compete requiring a broad variety of material formulations and the corresponding manufacturing technology. The first volume of the book examines the theoretical aspects of pressure-sensitive design, based on macromolecular chemistry, macromolecular physics, rheology and contact mechanics. The second volume describes the practical aspects of pressure-sensitive design and formulation, related to product application. The advances in the various domains are described by specialists.
Download or read book Pulp and Paper Manufacture written by Michael J. Kocurek and published by . This book was released on 1990 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
