Download or read book Tensile Properties of 12 Cold Worked Type 316 Stainless Steel Irradiated in EBR II Under Lower Dose Rate Conditions to High Fluence written by T. Yoshitake and published by . This book was released on 2001 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of lower-dose-rate irradiation on the tensile properties of 12% cold-worked type 316 stainless steel hexagonal ducts which were irradiated in the outer rows of EBR-II were investigated. Tension tests were conducted on a total of seventeen irradiation conditions. Fractographic examinations were performed on four irradiation conditions which were selected based on the results of tension tests. The results of the tension tests and fractographic examinations showed that the 316 stainless steel hexagonal ducts exhibited irradiation hardening typical to 316 stainless steels irradiated at similar temperatures and retained respectable ductility after the irradiation. There was no significant effect of dose rate on tensile properties for the range of irradiation conditions of this study.
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Austenitic Stainless Steels written by H S Khatak and published by Elsevier. This book was released on 2002-10-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study covers all types of corrosion of austenitic stainless steel. It also covers methods for detecting corrosion and investigating corrosion-related failure, together with guidelines for improving corrosion protection of steels. Details all types of corrosion of austenitic stainless steel Covers methods for detecting corrosion and investigating corrosion-related failure Outlines guidelines for improving corrosion protection of steels
Download or read book The Toughness of Cold Worked 316 Stainless Steel at 20 C written by C.G. Chipperfield and published by . This book was released on 1975 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Highly Irradiated 20 Percent Cold worked Type 316 Stainless Steel written by and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent experiments have extended the mechanical properties data base of 20 percent cold worked 316 stainless steel to a fluence of 1.3 x 1023 n/cm2 (E> 0.1 MeV), the goal exposure of the Fast Flux Test Facility. Both uniaxial and biaxial tests were conducted on speciments of developmental cladding which were irradiated in the Experimental Breeder Reactor-II at temperatures ranging from 370°C to 650°C. Uniaxial tensile tests were conducted at strain rates ranging from 10−5/s to 10−3/s. Controlled Biaxial Strain Rate (CBSR) tests, recently developed at the Hanford Engineering Development Laboratory, were conducted only at a strain rate of 10−5/s. CBSR specimens are gas-loaded to produce a constant diametral strain rate. These tests are otherwise analogous to uniaxial tensile tests. The tensile strength and ductility of the cladding were generally in good agreement with the predicted values.
Download or read book Stress Rupture of 20 Cold worked Aisi Type 316 Stainless Steel at Elevated Temperatures written by C. Y. CHENG and published by . This book was released on 1971 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Stan T. Rosinski and published by ASTM International. This book was released on 2001 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Todd R. Allen and published by ASTM International. This book was released on 2006 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1983 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Nuclear Energy Research written by U.S. Atomic Energy Commission. Division of Plans and Reports and published by . This book was released on 1962 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Influence of Radiation on Material Properties written by F. A. Garner and published by ASTM International. This book was released on 1987 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Reactor Structural Alloys After Neutron Or Particle Irradiation written by C. J. Baroch and published by ASTM International. This book was released on 1975 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
