Download or read book Millimeter Wave mmWave Communications written by Manuel García Sanchez and published by MDPI. This book was released on 2020-03-25 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The millimeter-wave frequency band (30–300 GHz) is considered a potential candidate to host very high data rate communications. First used for high capacity radio links and then for broadband indoor wireless networks, the interest in this frequency band has increased as it is proposed to accommodate future 5G mobile communication systems. The large bandwidth available will enable a number of new uses for 5G. In addition, due to the large propagation attenuation, this frequency band may provide some additional advantages regarding frequency reuse and communication security. However, a number of issues have to be addressed to make mm-wave communications viable. This book collects a number of contributions that present solutions to these challenges.
Download or read book Detecting and Classifying Low Probability of Intercept Radar written by Phillip E. Pace and published by Artech House. This book was released on 2009 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive book presents LPI radar design essentials, including ambiguity analysis of LPI waveforms, FMCW radar, and phase-shift and frequency-shift keying techniques. Moreover, you find details on new OTHR modulation schemes, noise radar, and spatial multiple-input multiple-output (MIMO) systems. The book explores autonomous non-linear classification signal processing algorithms for identifying LPI modulations. It also demonstrates four intercept receiver signal processing techniques for LPI radar detection that helps you determine which time-frequency, bi-frequency technique best suits any LPI modulation of interest."--Publisher.
Download or read book Handbook of Advanced Plasma Processing Techniques written by R.J. Shul and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pattern transfer by dry etching and plasma-enhanced chemical vapor de position are two of the cornerstone techniques for modern integrated cir cuit fabrication. The success of these methods has also sparked interest in their application to other techniques, such as surface-micromachined sen sors, read/write heads for data storage and magnetic random access memory (MRAM). The extremely complex chemistry and physics of plasmas and their interactions with the exposed surfaces of semiconductors and other materi als is often overlooked at the manufacturing stage. In this case, the process is optimized by an informed "trial-and-error" approach which relies heavily on design-of-experiment techniques and the intuition of the process engineer. The need for regular cleaning of plasma reactors to remove built-up reaction or precursor gas products adds an extra degree of complexity because the interaction of the reactive species in the plasma with the reactor walls can also have a strong effect on the number of these species available for etching or deposition. Since the microelectronics industry depends on having high process yields at each step of the fabrication process, it is imperative that a full understanding of plasma etching and deposition techniques be achieved.
Download or read book Conference Proceedings written by and published by . This book was released on 2006 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1995 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1972 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book written by and published by . This book was released on 1992 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Microwave and Millimeter Wave Monolithic Circuits Symposium Digest of Papers written by and published by . This book was released on 1991 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Memorandum written by and published by . This book was released on 2000 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Simulation and Applications of Inductors and Transformers for Si RF ICs written by Ali M. Niknejad and published by Springer Science & Business Media. This book was released on 2005-12-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits).
Download or read book Microwaves RF written by and published by . This book was released on 1990 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Based Testing for Embedded Systems written by Justyna Zander and published by CRC Press. This book was released on 2017-12-19 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: What the experts have to say about Model-Based Testing for Embedded Systems: "This book is exactly what is needed at the exact right time in this fast-growing area. From its beginnings over 10 years ago of deriving tests from UML statecharts, model-based testing has matured into a topic with both breadth and depth. Testing embedded systems is a natural application of MBT, and this book hits the nail exactly on the head. Numerous topics are presented clearly, thoroughly, and concisely in this cutting-edge book. The authors are world-class leading experts in this area and teach us well-used and validated techniques, along with new ideas for solving hard problems. "It is rare that a book can take recent research advances and present them in a form ready for practical use, but this book accomplishes that and more. I am anxious to recommend this in my consulting and to teach a new class to my students." —Dr. Jeff Offutt, professor of software engineering, George Mason University, Fairfax, Virginia, USA "This handbook is the best resource I am aware of on the automated testing of embedded systems. It is thorough, comprehensive, and authoritative. It covers all important technical and scientific aspects but also provides highly interesting insights into the state of practice of model-based testing for embedded systems." —Dr. Lionel C. Briand, IEEE Fellow, Simula Research Laboratory, Lysaker, Norway, and professor at the University of Oslo, Norway "As model-based testing is entering the mainstream, such a comprehensive and intelligible book is a must-read for anyone looking for more information about improved testing methods for embedded systems. Illustrated with numerous aspects of these techniques from many contributors, it gives a clear picture of what the state of the art is today." —Dr. Bruno Legeard, CTO of Smartesting, professor of Software Engineering at the University of Franche-Comté, Besançon, France, and co-author of Practical Model-Based Testing
Download or read book High speed Electronics and Device Scaling written by Lester F. Eastman and published by . This book was released on 1990 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Beamforming in Wireless Communications written by John Litva and published by Artech House Mobile Communicat. This book was released on 1996 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosive growth of wireless communications is demanding increased system capacity for mobile communications satellites - and the expert authors of this first-of-a-kind book explore a promising, cost-effective solution: digital beamforming (DBF) technology.
Download or read book Gallium Arsenide News written by and published by . This book was released on 1987 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compound Semiconductor Electronics written by Michael Shur and published by World Scientific. This book was released on 1996 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many respects, compound semiconductor technology has reached the age of maturity when applications will have been defined, yields are high enough and well established, and gallium arsenide and related compounds have carved many important niches in electronics. This book reviews the state-of-the-art of compound semiconductor electronics. It covers the microwave, millimeter wave, and submillimeter wave devices, monolithic microwave and digital integrated circuits made from compound semiconductors and emerging wide band semiconductor materials. The book is written by leading experts in compound semiconductor electronics from industry and academia and strikes the balance between practical applications, record-breaking results, and design and modeling tools specific for compound semiconductor technology. Engineers, scientists, and graduate students working in solid state electronics and especially in the area of compound semiconductor electronics will find this book very useful. It could also be used as a text or a supplementary text for graduate courses in this field.
