Download or read book 1 Butene Production from Ethylene Cost Analysis Butene E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of 1-Butene production from ethylene. The process examined is similar to the Axens Alphabutol Process. In this process, ethylene is dimerized into butenes with high selectivity for 1-Butene. Main product 1-Butene is then separated from raffinate-2 byproduct. This report was developed based essentially on the following reference(s): Keywords: Dimerization, Axens, Alphabutol, Linear Alpha Olefins, Ethene, SABIC

Download or read book Butenes Production from Ethylene Cost Analysis Butene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Butenes production from ethylene using a dimerization process. The process examined is similar to CB&I Lummus Ethylene Dimerization Technology. In this process, gasoline and fuel oil are generated as by-products. This report was developed based essentially on the following reference(s): US Patent 4242531, issued to Phillips Petroleum Company in 1980 Keywords: Olefins Dimerization, Ethene, Butylene, n-Butene, 2-Butene, Loop Reactor

Download or read book Isobutylene Production from Isobutane Cost Analysis Isobutylene E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isobutylene production from isobutane using a dehydrogenation process. The process examined is similar to UOP Oleflex process. In this process, the dehydrogenation reaction is carried out in a moving-bed reactor. This report was developed based essentially on the following reference(s): Keywords: Isobutene, Continuous Catalyst Regeneration, CCR

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015 (2) US Patent 20030171512, issued to Univation in 2003 (3) US Patent 8378029, issued to Univation in 2013 Keywords: Ethene, PE, Butylene, Copolymer

Download or read book Butenes Production from Propylene Cost Analysis Butene E41A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Butenes production from propylene via metathesis. The process examined is a typical metathesis process. In this process, ethylene is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Butylene, Propene, Ethene, Disproportionation

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Copolymer

Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways: * Pathway 1: Ethylene Production from Ethane * Pathway 2: Ethylene Production from Ethane and Propane * Pathway 3: Green Ethylene Production from Ethanol In Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs - Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration

Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene. The process examined is similar to Shell OMEGA process. In this process, ethylene is first oxidized with oxygen to produce ethylene oxide, which is further converted to MEG. This report was developed based essentially on the following reference(s): (1) US Patent 8329959, issued to Shell in 2012 (2) US Patent 8217190, issued to Shell in 2012 Keywords: Ethene, Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process

Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways:* Pathway 1: Propylene Production from Light Naphtha* Pathway 2: Propylene Production from Ethylene and Butenes* Pathway 3: Propylene Production from Propane (with Hydrogen Generation)Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT

Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways:* Pathway 1: Ethylene Production from Ethane* Pathway 2: Ethylene Production from Ethane and Propane* Pathway 3: Green Ethylene Production from EthanolIn Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock.The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration

Download or read book Linear Alpha Olefins from Ethylene Cost Analysis LAO E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Alpha Olefins (LAO) production from ethylene. The process examined is similar to Chevron Phillips process. In this process, ethylene is oligomerized to produce Linear Alpha Olefins ranging from C4 to C30+. This report was developed based essentially on the following reference(s): (1) "Olefins, Higher", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) US Patent 5510556, issued to Chevron in 1996 Keywords: Ethene, Ethylene Oligomerization, Gulf Oil Chemicals Company

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals Advanced SCLAIRTECH process. This report was developed based essentially on the following reference(s): US Patent 6319996, issued to Nova Chemical in 2001 Keywords: Ethene, PE, Methylpentane, Stirred-Reactor, Dual-Reactor

Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E31A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Homopolymer High Density Polyethylene (HDPE) production starting from polymer grade (PG) ethylene using a slurry loop process. The process described is a slurry loop reactor process, similar to Chevron Phillips CPChem and INEOS Innovene S. In this study, it is considered a single loop reactor polymerization for production of homopolymer HDPE. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): US Patent 20140256889A1, issued to Chevron Phillips Chemical Company Keywords: Ethene, PE, Loop Reactor, Slurry Reactor, Homopolymer

Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E13A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry loop process. The process examined is similar to Borealis BORSTAR process. This process is based on a dual reactor system (slurry and gas phase reactors) to produce HDPE bimodal polymer. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Loop Reactor, Slurry Reactor, Gas Reactor, Copolymer