Download or read book 1 3 Gas Surface Processes and LEED written by J. W. May and published by . This book was released on 1967 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low energy back-reflection electron diffraction (LEED) is a powerful method for studying monocrystalline surfaces, either in the clean state or with adsorbed substances. Weak penetration of slow electrons means that mainly surface atoms are important for scattering whether they belong to the substrate or to an adsorbed species. Clean surfaces can be produced and studied prior to adsorption experiments. LEED studies show that gases can be adsorbed in 2-dimensional arrangements peculiar to the specific crystallographic orientation of a particular single crystal substrate. Chemisorption often causes reconstruction of the surface with substrate atoms moving to new positions to incorporate foreign atoms in 2-dimensional matrices. Heating gas-covered surfaces may bring about faceting to expose other crystallographic planes (gross reconstruction). Heating may also cause the adsorbate to decompose, dissolve in the substrate or partially evaporate to leave behind different structures of lower coverage. Experiments illustrating many of these features are described for nickel and tungsten surfaces after adsorption of oxygen.
Download or read book Symposium on Adhesion Or Cold Welding of Materials in Space Environments written by and published by ASTM International. This book was released on with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Processing and Laser Assisted Chemistry written by E. Fogarassy and published by Elsevier. This book was released on 1990-12-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume cover all aspects of laser assisted surface processing ranging from the preparation of high-Tc superconducting layer structures to industrial laser applications for device fabrication. The topics presented give recent results in organometallic chemistry and laser photochemistry, and novel surface characterization techniques. The ability to control the surface morphology by digital deposition and etching shows one of the future directions for exciting applications of laser surface processing, some of which may apply UV and VUV excitation. The understanding of elementary proceses is essential for the design of novel deposition methods, with diamond CVD being an outstanding example. The high quality of these contributions once again demonstrates that the E-MRS is an efficient forum for interaction between research workers and industry.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Gas Surface Interactions written by Howard Saltsburg and published by Elsevier. This book was released on 2013-10-22 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Gas–Surface Interactions presents the study of the surface itself and the study of the gas phase partner of the interaction in which physical or chemical transformation of the gas resulted from that interaction. This book discusses the study of the energy and momentum exchanges resulting from the gas–solid physical interaction in which either gas or solid phase properties can be measured. Organized into three parts encompassing 33 chapters, this book begins with an overview of the different sensitive physical methods for the study of surface topography, surface defects, and surface irregularities to an accuracy of a few Angstroms. This text then reviews the adsorption at very low coverage that has yielded to equilibrium analysis. Other chapters consider the measurement of surface area by adsorption and optical techniques. The final chapter deals with scattering processes including momentum and energy transfer. This book is a valuable resource for engineers.
Download or read book Gas Phase and Surface Chemistry in Electronic Materials Processing Volume 334 written by T. J. Mountziaris and published by . This book was released on 1994-05-27 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Simple Processes at the Gas Solid Interface written by R.G. Compton and published by Elsevier. This book was released on 1984-07-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simple Processes at the Gas-Solid Interface
Download or read book Dynamic Chemical Processes on Solid Surfaces written by Ken-ichi Tanaka and published by Springer. This book was released on 2017-02-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the author determines that a surface is itself a new material for chemical reaction, and the reaction of the surface provides additional new materials on that surface. The revelation of that peculiarity is what makes this book different from an ordinary textbook, and this new point of view will help to provide a new impetus when graduate students and researchers consider their results. The reaction of surface atoms provides additional new compounds, but these compounds cannot be detached from the surface. Some compounds are passive, but others work as catalysts. One superior feature of the surface is the dynamic cooperation of two or more different functional materials or sites on the same surface. This fact has been well established in the preferential oxidation of CO on platinum supported on a carbon nanotube with Ni-MgO at its terminal end. The Pt and Ni-MgO are perfectly separated, but these two are indispensable for the selective oxidation of CO in H2, where the H2O molecule plays a key role. The reader will understand that the complexity of catalysis is due to the complexity of the dynamic processes on the surface.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Gas Processing from Midstream to Downstream written by Nimir O. Elbashir and published by John Wiley & Sons. This book was released on 2019-02-04 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the current status and challenges for natural gas and shale gas production, treatment and monetization technologies Natural Gas Processing from Midstream to Downstream presents an international perspective on the production and monetization of shale gas and natural gas. The authors review techno-economic assessments of the midstream and downstream natural gas processing technologies. Comprehensive in scope, the text offers insight into the current status and the challenges facing the advancement of the midstream natural gas treatments. Treatments covered include gas sweeting processes, sulfur recovery units, gas dehydration and natural gas pipeline transportation. The authors highlight the downstream processes including physical treatment and chemical conversion of both direct and indirect conversion. The book also contains an important overview of natural gas monetization processes and the potential for shale gas to play a role in the future of the energy market, specifically for the production of ultra-clean fuels and value-added chemicals. This vital resource: Provides fundamental chemical engineering aspects of natural gas technologies Covers topics related to upstream, midstream and downstream natural gas treatment and processing Contains well-integrated coverage of several technologies and processes for treatment and production of natural gas Highlights the economic factors and risks facing the monetization technologies Discusses supply chain, environmental and safety issues associated with the emerging shale gas industry Identifies future trends in educational and research opportunities, directions and emerging opportunities in natural gas monetization Includes contributions from leading researchers in academia and industry Written for Industrial scientists, academic researchers and government agencies working on developing and sustaining state-of-the-art technologies in gas and fuels production and processing, Natural Gas Processing from Midstream to Downstream provides a broad overview of the current status and challenges for natural gas production, treatment and monetization technologies.
Download or read book Handbook of Thin Film Process Technology written by D Glocker and published by CRC Press. This book was released on 2018-01-18 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Thin Film Process Technology is a practical handbook for the thin film scientist, engineer and technician. This handbook is regularly updated with new material, and this volume presents additional recipe-type information (i.e. important deposition system details and process parameters) for optical materials.
Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2001 Wyn Roberts celebrated both his 70th birthday and 50 years of working in surface science, to use the term "surface science" in its broadest meaning. This book aims to mark the anniversary with a contribution of lasting value, something more than the usual festschrift issue of a relevant journal. The book is divided into three sections: Surface Science, Model Catalysts and Catalysis, topics in which Wyn has always had interests. The authors for each chapter were chosen from some of the many eminent scientists who have worked with Wyn in various ways and are all internationally acknowledged as leaders in their field. The authors have produced authoritative reviews of their own specialties which together result in a book with an unrivalled combination of breadth and depth exploring the most recent developments in surface chemistry and catalysis.
Download or read book Micro Process Engineering 3 Volume Set written by Volker Hessel and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume handbook provides an overview of the key aspects of micro process engineering. Volume 1 covers the fundamentals, operations and catalysts, volume 2 examines devices, reactions and applications, with volume 3 rounding off the trilogy with system, process and plant engineering. Fluid dynamics, mixing, heat/mass transfer, purification and separation microstructured devices and microstructured reactors are explained in the first volume. Volume 2 segments microreactor design, fabrication and assembly, bulk and fine chemistry, polymerisation, fuel processing and functional materials into understandable parts. The final volume of the handbook addresses microreactor systems design and scale-up, sensing, analysis and control, chemical process engineering, economic and eco-efficiency analyses as well as microreactor plant case studies in one book. Together, this 3-volume handbook explains the science behind micro process engineering to the scale-up and their real life industrial applications.
Download or read book Tailoring Surfaces Modifying Surface Composition And Structure For Applications In Tribology Biology And Catalysis written by Nicholas D Spencer and published by World Scientific. This book was released on 2011-03-08 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is surface modification, with the goal of tailoring materials for a specific application. By means of this approach, ideal bulk properties of a material, such as its tensile strength (temperature stability, density, or even cost) can be combined with optimized surface properties, such as hardness, biocompatibility, low or high friction or adhesion, water repellency or wettability, or catalytic activity.The works of the author — many of his crucial papers are included — deal with the understanding and modification of surfaces and span fields including catalysis, analytical surface science, self-assembled monolayers, tribology, biomaterials, superhydrophobicity and polymer coatings.
Download or read book LEED Reference Guide for Building Design and Construction written by US Green Building Council and published by . This book was released on 2016-07-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book Chemistry of the Metal gas Interface written by Meirion Wynn Roberts and published by Oxford University Press, USA. This book was released on 1978 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
